Been looking at these lately and found this:
http://www.airgunbbs.com/showthread....ighlight=Jumbo
Hi guys
I have just recieved a record jumbo deluxe..a quirky little pistol indeed!
I fired one pellet through it...all fine,Yet since that joyous moment each
Pellet fired won't leave the barrel....the breach seal looks fine and the pellets
Push out easily enough so they're not too tight.
Piston washer perhaps? Though as I've only just purchased it as a working gun I didn't really
Want to take it apart only to find the part I require is obsolete(and rumour has it they're tricky to strip?)
All advice much appreciated
Thanks
Nick
Been looking at these lately and found this:
http://www.airgunbbs.com/showthread....ighlight=Jumbo
Max; looking for: Baikal IZH 61 side lever rifle
Cheers Felix...I bought it as a working gun...it managed 1shot!
hi i strip every gun b4 shooting it if 2nd hand as you never know you may be daming it .dose not take long to clean and re lube and gives pease of mind and you learn from it.
Cheers splosh!
I just didn't want to strip it in case the parts I need are obsolete..it was supposed to work.
It really is a funky little pistol!
An easy pistol to work on, not like the big brother Record Champion repeater.
Baz
BE AN INDEPENDENT THINKER, DON'T FOLLOW THE CROWD
Don't suppose anyone knows where I could get a spare spring or piston seal for this.
Last edited by Nickos; 21-01-2015 at 12:44 PM.
You can use any generic spring that is around the right dimensions. The last one I did used an existing spring for another pistol. Do not remember if it was a Webley or a Hyscore spring I used. The piston seal is a problem as it is eliptical.
Baz
BE AN INDEPENDENT THINKER, DON'T FOLLOW THE CROWD
I have got a scrambled champion I can't even get it apart! Is there an expert in the house?
Ormicron
Ormicron will see if I can track down the website of guy in New Zealand who stripped one down.
Best regards, Baz
Last edited by Benelli B76; 19-01-2015 at 07:02 PM.
BE AN INDEPENDENT THINKER, DON'T FOLLOW THE CROWD
Thanks for the advice, I will have look see if I can find the drawing.
Regards Paul
http://www.airgunforum.net/agf/index...howtopic=28827
this link might help, ...mike...
My previous post was regarding the Record Champion which is a different kettle of fish to the Jumbo.
Baz
Last edited by Benelli B76; 19-01-2015 at 07:04 PM.
BE AN INDEPENDENT THINKER, DON'T FOLLOW THE CROWD
Cheers baz
It's the piston seal I need.
Last edited by Nickos; 21-01-2015 at 12:45 PM.
Thanks mike.