Not sure with that set-up, but had a similar problem today, which was caused by a fitting not done up tight - tightened it up & no further problem.
Not sure with that set-up, but had a similar problem today, which was caused by a fitting not done up tight - tightened it up & no further problem.
The O ring is missing.
www.shebbearshooters.co.uk. Ask for Rich and try the coffee
Looks like a DIN 300 connector with the "O" ring missing. If I were looking for one here on the left side of the Atlantic I would try a dive shop or paintball shop.
Here is what it should look like.
http://i991.photobucket.com/albums/a...ps39cd3acb.jpg
I think you will find it is an 11mm ID by 3mm thick ring.
www.shebbearshooters.co.uk. Ask for Rich and try the coffee