Page 1 of 3 123 LastLast
Results 1 to 15 of 39

Thread: .308W loads

  1. #1
    Join Date
    Aug 2003
    Location
    Taunton, Somerset
    Posts
    4,586

    .308W loads

    With a .308 in the pipeline, its time to start looking at starting loads and bullet weights. Barrel length is 26" and twist is 1:12.

    What powders and bullets are people using? I will be shooting out to 1000yds, including 300yd Mcqueens.
    Work them hard, treat them like heros.

  2. #2
    Join Date
    Jun 2005
    Location
    leeds, west yorkshire
    Posts
    13,023
    175 gns berger vld and 43.5 gn of varget

  3. #3
    Randy Bohannon's Avatar
    Randy Bohannon is offline “Junes1 is a whining bellend”
    Join Date
    Jan 2007
    Location
    London
    Posts
    28,522
    not a bad start------^


    With that barrel length it might be tricky to get 155 grain sierra and Lapua match bullets to stay supersonic but it might work out.

    I'm playing with 185 gr Bergers at the moment.
    "An infinite number of monkeys banging away at type writers for an infinite period of time will eventually reproduce Hamlet" Thanks to discussion forums we now know this to be untrue.

  4. #4
    Join Date
    Jan 2016
    Location
    Reading
    Posts
    316
    I shoot 168gr amax with 42gr of reloader 15. Really good for medium range work. I tried it at 1000 and baely got it on the black!

    My new load is 155gr smk with 44gr reloader 15. 1000yd test in feb.

    Thats with a 26" 1-12 twist remi 700

  5. #5
    Join Date
    May 2009
    Location
    Reading
    Posts
    4,806
    all depends on what your rifle likes Nick, Scotts scaffold pipe shows pressure signs with much above 43 grns N140 behind a 2155, my 20" barrel swallows 45Grns easily and looks like 46grns isn't going to be a problem, his load spits out at almost 3000, mine 26-2700, go figure! if you aren't worried about F class at 1000, then 2155's work great at 300,600 and will hold the target at 1000, even at slower speeds, you just won't win any long range comps against 260's 6.5's etc. 175 SMK's could be a goer, Danny is your man for getting the most out of .308
    You Cannot Reason People Out of Something They Were Not Reasoned Into
    "Politicians like to panic, they need activity. It is their substitute for achievement" Sir Humphry Appleby

  6. #6
    Join Date
    Nov 2008
    Location
    Whitstable , Kent
    Posts
    304
    44 Grains of N140 With 155 Lapua Scenars or 155 Palma Match , the Scenars are a faster bullet.
    mike

  7. #7
    Join Date
    Sep 2005
    Location
    London
    Posts
    938
    Nick
    My pet load for .308 was 44.5GN of N140 behind a 155 scenar.
    For the past year or so I haven't bothered reloading as 155 grain NRA issued GGG ammunition shoots on a par with my reloads and price wise doesnt cost me a great deal more than reloading.

  8. #8
    Join Date
    Aug 2003
    Location
    Taunton, Somerset
    Posts
    4,586
    Thanks everyone.
    Stu, is the ggg available from the range office? Rifle is an AI AT so expecting good things from it
    Work them hard, treat them like heros.

  9. #9
    Join Date
    Sep 2005
    Location
    London
    Posts
    938
    Available in the range office not sure on exact price but it's a few quid short of £90 for 100.
    Shoots well in my AX.

  10. #10
    Join Date
    Jan 2013
    Location
    Devizes
    Posts
    5,032
    My scaffold pipe load is 43.5 gr under a 2155 shoots well enough for me
    Thanks for looking

  11. #11
    Join Date
    Jun 2005
    Location
    leeds, west yorkshire
    Posts
    13,023
    my ph scout with its 20 inch barrel can hold 600 yds easily.
    with 175gn vld it was hitting bullseyes at diggle ranges until the wind picked up and it was landing in the 7 ring

  12. #12
    Join Date
    Mar 2010
    Location
    Inverness, Highlands, God's own country.
    Posts
    10,067
    Quote Originally Posted by loiner1965 View Post
    175 gns berger vld and 43.5 gn of varget
    42gns Varget in my 22" barrel gives me around 2550 fps with the 175 Bergers. & better than me at 600 yards.
    Pistol & Rifle Shooting in the Highlands with Strathpeffer Rifle & Pistol Club. <StrathRPC at yahoo.com> or google it.
    No longer Pumpin Oil but still Passin Gas!

  13. #13
    Join Date
    Oct 2011
    Location
    bradford
    Posts
    177
    45gr of n140 and 155 palma match works a treat.

    Mick.
    Marlin 1894, Anschutz 54 weaver T36
    Cz 452 tasco world class plus
    357 Taurus.

  14. #14
    Join Date
    Mar 2010
    Location
    Inverness, Highlands, God's own country.
    Posts
    10,067
    Quote Originally Posted by Bomag View Post
    With a .308 in the pipeline, its time to start looking at starting loads and bullet weights. Barrel length is 26" and twist is 1:12.

    What powders and bullets are people using? I will be shooting out to 1000yds, including 300yd Mcqueens.
    Don't forget, start with publicised loads from a recognised reloading manual, before even thinking about any "internet" favourite loads! What works well in MY rifle may give unsafe loads in YOUR Rifle!
    Pistol & Rifle Shooting in the Highlands with Strathpeffer Rifle & Pistol Club. <StrathRPC at yahoo.com> or google it.
    No longer Pumpin Oil but still Passin Gas!

  15. #15
    Join Date
    Oct 2010
    Location
    reading
    Posts
    539
    What he said
    But I use Hornady 178 bthp and 41.5g n140 @ 2470fps from a 20"
    There are two means of refuge from the miseries of life: Music and Cats.
    Albert Schweitzer

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •