Quote Originally Posted by oldskoolzzz View Post
Hi Old Jud,

Whilst I can't help directly with spares suppliers usually I would of said Rus milliatry.

If you haven't already have you checked out the UBC in the the mak forum?

Plenty of advice and seal fitting etc.

These might help:

http://umarexboysclubforum.myfinefor...p?f=64&t=22289

http://umarexboysclubforum.myfinefor...forum.php?f=64
Quote Originally Posted by Joncaddy View Post
Hi, not sure if it would be considered 'high quality' but I've replaced the co2 seal on Baikal Makarovs with a small section of the appropriate size thick wall silicon tubing. A 2.5mm squarely cut slice does the job, so far its outlasted the originals, and the ones i got from russia. Available from that web site or model shops as fuel pipe. John.
Thanks guys, i'm a member of the UBC but didn't realise there was a Mak section......Doh!
I've ordered a length of 3mm internal diameter silicone tubing (as recommended on the UBC) off a well know auction site, hopefully it will help.
Many thanks guys.