FAS 6004 sights.

[brucieboy]

https://www.flickr.com/photos/133234.../shares/RJ45oH
I've got these left over after fitting a rail to mine as my eyes aren't up to using the open sights.There's a new front sight,a filed down pointed front sight,2 shortened springs to allow the rear sight to go low for short range plus the other bits including the front sight grub screw which I forgot to put in the picture.The rear sight aperture has been filed slightly round.
Are these actually worth anything to anyone?
SOLD.

[mikehill]

I'd like them to replace my worn ones depending on cost.

[Smithfire]

I have a question on this very subject you may be able to help me with.

I remember when the 6004 came out, it got some negative feedback regarding the rear sight not going down enough to shoot at ten metres.....wondered if this was sorted out?

Many thanks

Clive

[brucieboy]

Mine was the same.You need a couple of coils cutting off,shorter springs or the same length but wider spaced coils as the originals get coil-bound and won't allow the sight to go low enough.

[Smithfire]

That seems a bit pants seeing as its primarily a 10m pistol? Wonder if they'll rectify it?

Clive

[clarky]

https://www.flickr.com/photos/133234.../shares/RJ45oH
I've got these left over after fitting a rail to mine as my eyes aren't up to using the open sights.There's a new front sight,a filed down pointed front sight,2 shortened springs to allow the rear sight to go low for short range plus the other bits including the front sight grub screw which I forgot to put in the picture.The rear sight aperture has been filed slightly round.
Are these actually worth anything to anyone?
SOLD.

any chance of seeing your railed 2004....thanks buddy