Great review Mod. I love a happy ending. Enjoy many long hours with the new toy. I think I want one.
Trig
Project ‘Tightwad’!!
Mean. Stingy. Tight!
Just a few of the uncharitable words that have been used to describe me. Whatever, over the years I have developed an unholy love of taking budget end rifles and doing just enough to make them shoot. The satisfaction gained from outshooting an outfit costing double, is without compare – and this is what started me thinking………….
Sometime back I decided to investigate whether it was possible to build a rig that would shoot – but not cost the sort of figures that are bandied around amid the long range fraternity. The idea was straightforward. I wanted something that would be capable of comfortably taking 300lb game out to 600Metres. Maybe target shooting or plinking out a bit further still. Nothing too extreme, but still biggish distances for a shooter here in the UK.
http://i2.photobucket.com/albums/y8/IanF/Nwifle.jpg
After a bit of research I settled on a Varmint spec Howa 1500 – recently imported to the UK by Brian Fox of Fox Firearms. With a pedigree stretching back over the years and a design picking the best bits out of the Remington 700 they couldn’t be that bad – could they? The retail pricing was so competitive that getting hold of one took a couple months – gunshops were selling their stock as soon as it was on the shelves.
When I eventually took delivery – first impressions were very good. The model selected was the stainless laminate in .308win. The stock is an attractive silver grey construction that compliments the matt stainless barrel and action. A friend purchased the same model in a blued finish – his stock exhibited a slight greenish tinge that again made for a stunning looking rifle combination.
Wood to metal fit was excellent – the barrel being free floated, the fore end having 9 ventilation slots that add to the striking looks of the stock. Metal work seemed to be of high quality – the overall impression being of a lot of rifle for the money paid out.
Three position safety, allowed unloading from the drop plate magazine with the trigger blocked – a welcome feature on a budget tool. The rifle was looking better and better.
Once back home and it became apparent there was room for a little fettling to be carried out. The barrel was bearing slightly against the left hand side of the channel. With the stock screws loosened off, there was considerable movement indicating the potential for an improvement in the bedding.
Trigger pull was crisp without noticeable creep – but a bit on the heavy side for a rifle intended for precision use.
All in all, not much to get sorted.
Weaver bases and mounts were knocking around the bits box – and I had dug out an early Tasco 10 x 42 which I soon had mounted and bore sighted. Still no great expenditure. Out of curiosity, off to the range to see what it could achieve out of the box.
The first few shots on the range were a disappointment. I had picked up a few boxes of 168gn Privy Partizan match after reading a couple favorable reviews – but it soon became apparent that it did not really like it. At one hundred meters, two+ inch groups from a varmint weight barrel was not quite what I was hoping for.
Moving to 165gn Hornaday Interbonds made for a noticeable improvement and grouping improved to an inch and a half as the velocity increased. Still not too dispirited (I had not got around to relieving the barrel channel) I threw in some 150gn loads I had put together for a friend. Bingo! :0) Bullet holes touching, and a tidy group that had shrunk to .53 inch! I got a strong feeling that this was going to be a shooter.
http://i2.photobucket.com/albums/y8/...rgetMedium.jpg
Back home and the next stage was glass bedding the stock. Having done this on several rifles, without exception it has resulted in a noticeable improvement. After trying various mediums – I now stick to Acraglas GEL. Very important decision, as it is far easier to handle than the glass bed version.
As normal, an hour spent in preparation was followed by a day waiting in anticipation of that moment when rifle is parted from the stock and you can see the fruits of your labours. I bedded from the recoil lug, forward to the point where the barrel taper steadies to a regular profile. Gel was placed around the action tang to ensure an evenly bedded action.
Once all had hardened off, I took a look at the trigger and safety. Backing out the FRONT screw has the effect of quickly lowering the pull to a very pleasant one and a half pounds. A bit light for a stalking rifle maybe, but for shooting accurately from a static position it is my preferred setting. Leave the rear screw alone – it controls backlash and is set at an optimum postion. Incautious adjustment will have the effect of bringing in creep and probably mucking up the safety catch operation.
The safety works on a sprung plug that blocks the trigger – allowing bolt operation in its middle position. Removing the circlipped pins will allow disassembly without altering trigger settings. I rounded off the cone that forms one end of the plunger – the safety action becoming much smoother and lighter. After reassembly and confirmation of safety catch operation, it was time to reassemble, test and adjust if necessary.
The blued steel version tried, had a very smooth action by comparison to my stainless receiver. Dry fire practice with a little SolvolAutosol applied to the rails has resulted in the overall feel of the rifle improving noticeably. After thoroughly cleaning the metal polish out of the action, a little moly grease was applied. The end result is very pleasant and smooth. Much like a good Sako action, you are not even sure your bolt has picked a round from the magazine.
Remounting the scope and the rifle was ready for a further range test.
A word about the scope I have chosen to use – branded the ‘Super Sniper’ it is a fixed 10 x 42 Mildot unit with external turret adjustment. A 30mm tube and rear mounted parallax adjustment completes the specification.
These were originally put forward to the US Navy when they were seeking a replacement for the Leupold. It was tested to destruction (as only the military can) and eventually taken into service by the SEALS. The original scopes were excellent quality – this soon slipped however and the name ‘Trashco’ started to be bandied around.
Years later, the Super Sniper is back. Manufactured (in the Hakko factory – same people constructing the Nightforce range) and sold direct by SWFA. Excellent optics, very repeatable tracking and bomb proof construction.
Have a look at the website www.swfa.com and check out the testimonials. Do try to get your hands on one rather than discounting them on price. They cost pennies in the US and are now truly excellent value for money. I thoroughly recommend them.
Back at the range, I used the same load that had previously shown to be successful. The idea being that it would show any improvements due to my efforts at bedding.
Following a couple shots which keyholed, I felt confident enough to make some corrections and place the group above the aiming point. A dry pullthrough with a Boresnake and I settled the rifle back onto the sand bag.
The first two shots keyholed once again. Trying my best to stay focused on good technique, I squeezed off the final round of the group.
http://i2.photobucket.com/albums/y8/IanF/HGpMedium.jpg
At .16inch centre to centre – this is the best group I have ever managed to achieve. To say I am satisfied with the rifle/scope combination is an understatement.
I look forward to taking this performance out to greater distances – it’s looking very promising.
Would I recommend a Howa? Oh yes!!
Rgds
Mod
Last edited by Mod; 15-09-2005 at 10:00 PM.
Great review Mod. I love a happy ending. Enjoy many long hours with the new toy. I think I want one.
Trig
how much was it then??
They are a good scope for the money, but don't believe the SWFA hype. There was an NSN number issued for the 'Sniper' once, but it's never been seen on any real combat rifles, let alone ones used by Special Forces - it wouldn't be, because the low light performance is very average. I've had about every variation of this scope possible, from all the different manufacturers in the Far East - I still own two and I like them OK, but they aren't the last word in optics and stack up unfavourably even to some cheap Bushnell models.Originally Posted by Mod
Try it out at dusk, or with the sun against you, you'll soon find it's limitations.
Sid
I will not argue the points you have made - as I am only interested in this scope for longer range work and you have posted your experiences. On that basis, daylight hours sight picture and light gathering has always proved excellent. Lowlight long range shooting is not ethical and not on my agenda!
I am generally unconvinced by the manufacturer's sales blurb. However, they include pages of unsolicited user letters which should reassure any potential purchaser. The letters are in line with my experience.
I have also seen independent reviews in which the lowlight capabilities were found to be better than many other scopes - costing considerably more. Your experiences vary.
Excellent value for money we both agree - ideal for a 'Tightwad' like myself.
Rgds Ian
Last edited by Mod; 01-03-2009 at 08:41 PM.
Excellent review, I have been thinking about a Howa, anyone know if they do them in 6PPC?
As for the SS scope, I have tried quite a few very similar to this, such as EB, Tasco and Nikko, I didnt rate any of them in anything but bright daylight which is a pity, however I have a feeling none were the SS version
Baz
Thanks for taking the time to wright an informative review
cheers
Barry
"Now you wanna run around and talk about guns
Like I ain't got none What you think I sold 'em all
Cause I stay well off".
http://www.stmichaelsonline.com/
NRA Qualified RCO.
"Do you lick the lid of life ?"
Now thats what you call a review.
God has a hard on for green rifles
I have the same SuperSniper scope and am amazed by it's quality when you consider the cost.
It's just a damn shame SWFA wont export. In fact they wont even reply to emails..~!!
Tommo
.308 HS Precision HTR Custom Rem 700 .308 Parker-Hale Scout + P8 mod .243 Ruger M77 + P8 mod, Ruger 10/22, .22 CZ, 12g Hatsan Escort, 12g Lincoln No2, 12g Mossberg 500 12g Laurona sxs, Caesar Guerini Magnus 12g NRA RCO
Try Jon at www.theopticzone.comOriginally Posted by Tommo
Good service and good prices. No Super Snipers though.
Rustam
good review have a bump
A howa is looking better & better for me!
soooooooo cheap
Andy
I'm right in the middle of getting my Howa .243 varmint together, L/H stock from Richards Microfit. See here
Further info - if you really hate the trigger for some reason, Timney do a drop in replacement (Howa/Weatherby)!!
I'm happy with my adjusted version - some may differ!
rgds Mod
hope its as good as you say cos ive just bought the thing in the .243 stainless laminate thumbhole model so heres hopeing for when i get out and zero