Page 1 of 2 12 LastLast
Results 1 to 15 of 16

Thread: Reloading costs calculator

  1. #1
    Join Date
    Jul 2008
    Location
    Aotearoa
    Posts
    1,811

    Reloading costs calculator

    Following on from the other thread, i thought i would post

    Just getting back into reloading myself (and saddling myself with huge debts for the outlay (all my kit is in a storage container in the UK) )

    This is a very handy app that will immediately calculate the cost per round and allow you to compare it to buying factory ammo.
    It also has reloading data too.


    https://play.google.com/store/apps/d...stant&hl=en_GB

  2. #2
    Join Date
    Jul 2000
    Location
    Alnwick Northumberland
    Posts
    9,892
    Its not that hard to work out, does it really justify an app
    Do nothing, achieve nothing

  3. #3
    Join Date
    Feb 2008
    Location
    Huntingdon
    Posts
    9,253
    All I know, or care about, is that I can afford to reload and shoot, whereas if I didn't, I couldn't.

    For me, that's it.

    Next thing - if there isn't one already - is an APP that helps you to find an APP.

    tac

  4. #4
    Parabuteo is offline My Chrony has bought it a couple of times...
    Join Date
    Mar 2006
    Location
    Southampton
    Posts
    6,061
    What it wont tell you is the cost of gains in accuracy and reliability from a handload against factory, or factor in time.

    I worked it out ages ago and even leaving these out of the equation it was a no brainer, particularly given how much 556 I was getting through.
    I'm a maggot in another life you know

  5. #5
    Join Date
    Feb 2008
    Location
    Huntingdon
    Posts
    9,253
    Quote Originally Posted by Parabuteo View Post
    What it wont tell you is the cost of gains in accuracy and reliability from a handload against factory, or factor in time.

    I worked it out ages ago and even leaving these out of the equation it was a no brainer, particularly given how much 556 I was getting through.
    Try shooting .45-70 Govt the way we do most weeks at a bazillion £££ a hundred. I can cast my own bullets, load my own loads with 30gr of whatever for around £24/C.

    tac

  6. #6
    Parabuteo is offline My Chrony has bought it a couple of times...
    Join Date
    Mar 2006
    Location
    Southampton
    Posts
    6,061
    Quote Originally Posted by tacfoley View Post
    Try shooting .45-70 Govt the way we do most weeks at a bazillion £££ a hundred. I can cast my own bullets, load my own loads with 30gr of whatever for around £24/C.

    tac
    Yea, it works out a bit more with 77gr SMKs Tac but its still a bloody sight cheaper overall, and gives match quality ammo for less than milsurp. Factor in that I have not paid for brass for a year or two and have a couple of thousand GGG 5.56 once fired cases to get through and its cheaper still. Like I say, in most cases its a no brainer.
    I'm a maggot in another life you know

  7. #7
    Join Date
    Feb 2008
    Location
    Huntingdon
    Posts
    9,253
    Quote Originally Posted by Parabuteo View Post
    Yea, it works out a bit more with 77gr SMKs Tac but its still a bloody sight cheaper overall, and gives match quality ammo for less than milsurp. Factor in that I have not paid for brass for a year or two and have a couple of thousand GGG 5.56 once fired cases to get through and its cheaper still. Like I say, in most cases its a no brainer.
    I have around 250 .45-70Govt cases that refuse to wear out with the low loads I shoot.

    Lapua brass for the .308s and 6.5, and Grafs for the 7.5s. 7mm stuff is RWS from the late 80's that is still going strong.

    My 1000 nickel .357Mag cases, bought in 1996, occasionally get frilly at the top, but again, because they are not over-worked in reloading, seem to be going of forever.

    tac

  8. #8
    Join Date
    Dec 2012
    Location
    The Valleys of South Wales
    Posts
    2,636
    I like reloading. QED.
    [I]DesG
    Domani e troppo tardi

  9. #9
    Ruger_shooter's Avatar
    Ruger_shooter is offline Meadowlark Lemon's Personal Tailor
    Join Date
    May 2006
    Location
    Derry, N.Ireland
    Posts
    11,646
    I enjoy reloading (just as I enjoy fly tying); the app won't have an enjoyment adjustment to the calculation. If you have to worry about the cost then you really shouldn't be doing it.

  10. #10
    Join Date
    Feb 2008
    Location
    Huntingdon
    Posts
    9,253
    Quote Originally Posted by Ruger_shooter View Post
    I enjoy reloading (just as I enjoy fly tying); the app won't have an enjoyment adjustment to the calculation. If you have to worry about the cost then you really shouldn't be doing it.
    As I noted earlier, if I didn't reload, I sure as heck couldn't afford to shoot ANY centrefire stuff.

    tac

  11. #11
    Join Date
    Jun 2005
    Location
    leeds, west yorkshire
    Posts
    13,023
    Quote Originally Posted by tacfoley View Post
    As I noted earlier, if I didn't reload, I sure as heck couldn't afford to shoot ANY centrefire stuff.

    tac
    personally i like reloading as it gives the user satisfaction......its not just pulling the trigger its all the little stages leading up to it

  12. #12
    Join Date
    Nov 2013
    Location
    Telford
    Posts
    736
    PPU ammo in my 22-250 i could not beat by reloading my own

  13. #13
    Join Date
    Feb 2008
    Location
    Huntingdon
    Posts
    9,253
    Quote Originally Posted by ratshot5 View Post
    PPU ammo in my 22-250 i could not beat by reloading my own
    Sir, I'd be amazed if careful handloading and development could not beat any factory load. Are you basing your opinion on fact?

    tac

  14. #14
    Join Date
    Jan 2009
    Location
    Consett
    Posts
    1,271
    Quote Originally Posted by DesG View Post
    I like reloading. QED.
    Me too - it's a hobby in itself. The shooting is merely there just to use the ammo lol.

  15. #15
    Join Date
    Jan 2013
    Location
    Devizes
    Posts
    5,032
    Quote Originally Posted by tacfoley View Post
    Sir, I'd be amazed if careful handloading and development could not beat any factory load. Are you basing your opinion on fact?

    tac
    Likely he is talking cost wise and is probably right if you factor in reloading time, brass costs, electric for tumbling etc.
    Thanks for looking

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •