I've used a K&m neck turner with a Lee case holder in a drill.
You don't see then secondhand very often.
I'm looking at getting a neck turner ..
Who has one & what you recommend ?
Basically, I'm after a 2nd hand one, don't want to spend loads , but likewise don't want a lemon !
Cheers
Al.
Rem700 6.5 Creedmoor XLR Envy - Rem700 .20 prac XLR Element
CZ527 .17 Hornet AICS - Anschutz 1417 .22lr
I've used a K&m neck turner with a Lee case holder in a drill.
You don't see then secondhand very often.
Cheers..
With an ask though ..
Rem700 6.5 Creedmoor XLR Envy - Rem700 .20 prac XLR Element
CZ527 .17 Hornet AICS - Anschutz 1417 .22lr
k&m all the way.my advice is don't bother or get good kit.you can do more good than harm.imo its well worth doing even just a clean up skim if not running a tight neck chamber.only if your running bushing dies of good quality minus the expander mind.
Well used, but still turns necks
Very good !
Cheers guys ... Help appreciated
Rem700 6.5 Creedmoor XLR Envy - Rem700 .20 prac XLR Element
CZ527 .17 Hornet AICS - Anschutz 1417 .22lr
Hello to All,
+1 on the K&M - I used one for fifteen (15) years, turning necks for my 0.336" neck 0.308W (loaded rounds were 0.334" for one (1) thou radial clearance)
Have fun & a good Sunday,
Best regards
Russ
I've use a Forster case trimmer with outside neck turning and inside neck reaming attachments. Neck thickness variation is less than the tube micrometer I use (0.001"), so it seems to work just fine
ATB,
Kev.
I have a K&N neck turner I could part with.
A man can always use more alcohol, tobacco and firearms.
Richard
I have tried to message you, but your in box is full
I am very interested ..
Cheers
Al.
Rem700 6.5 Creedmoor XLR Envy - Rem700 .20 prac XLR Element
CZ527 .17 Hornet AICS - Anschutz 1417 .22lr
There's a clue in my sig, pm fills up to quickly, fire me an email.
A man can always use more alcohol, tobacco and firearms.
I did before & have again
Cheers
Al.
Rem700 6.5 Creedmoor XLR Envy - Rem700 .20 prac XLR Element
CZ527 .17 Hornet AICS - Anschutz 1417 .22lr