As title and piccies (courtesy of Garvin who hosted them for me).
All that I know about this item is that It's crudely made and seems to be in 0.25 cal (and whilst someone suggested that it's a prototype that sounds fanciful to me). It looks to me as if it's cobbled up out of 1920's Air Rifle bits and Ironmongery parts, but I'd appreciate any light that anyone else might be able to shed on the item as I want to sell it but need some idea as to a fair asking price.
The story is than : an elderly gentleman bought it into the local gun shop a couple of years ago with the "usual story of it having been in the family 70 years or so", but with no other provenance and it's consequently of unknown origin etc. One of the salespersons in the shop put it to one side for me and I subsequently brought it (don't ask me why, I certainly can't figure it out now as to why I did so)).
Does any one out there have a clue what it is and as to whether or not it's saleable, and if so, at what price.
Thanks, Vic Thompson.
Last edited by Vic Thompson; 15-07-2017 at 02:31 PM.
Vintage Airguns Gallery
..Above link posted with permission from Gareth W-B
In British slang an anorak is a person who has a very strong interest in niche subjects.
Vintage Airguns Gallery
..Above link posted with permission from Gareth W-B
In British slang an anorak is a person who has a very strong interest in niche subjects.
Very crude!
Presumably that little cap on the barrel unscrews for loading? Do you then need a probe to push the pellet past the transfer port, or is there one built into the cap?
Vintage Airguns Gallery
..Above link posted with permission from Gareth W-B
In British slang an anorak is a person who has a very strong interest in niche subjects.
Great to see you're still around Vic, I've still got that brown plastic suitcase filled with old Air Gunner and Airgun World magazines you sent me many moons ago.
Best,
Dan
I suppose you might call it a poor man's Abas Major. As far as value goes, I suppose around £20 would be OK for something that could be a talking point, although personally I would not give it house room.
Quote "Very crude!
Presumably that little cap on the barrel unscrews for loading? Do you then need a probe to push the pellet past the transfer port, or is there one built into the cap?"
Yes, that's correct, the thread on the end cap extends into the barrel and pushes the pellet forward, whilst the thread is relieved over the Transfer port region allowing air to flow past it to the pellet.
Regarding the Mags Dan, I hope that you're getting good use out of them, if I still had them they'd be making the rafters in the loft sag along with all of the other rubbish I've piled there over the years.
Vic T
Does anyone recognise anything about this item, and is it saleable ?
Vic T
Beauty is in the eye of the beholder,I think it's one of those cases of it's worth what somebody would pay. I wouldn't pay £20 because I wouldn't feel it's fair on the seller. I'd personally say 3 times that to the right person. It's so ugly it's beautiful. Atb Phil
Home made I'd say, and from the sight alignment it looks like the maker was expecting massive recoil, massive pellet drop, or both.
Worth £40 as a curiosity, maybe more if refinished.
l find one-offs intresting, to think that someone as put some thought into making a air pistol or rifle. it's a pity that whoever made this one didn't make the grips a bit longer. as l think it would have made it look better.
Vaguely reminiscent of stuff made in the local PoW camp in 40's
Based on the number of views to date there's been a lot of passing interest in this item.
I might be wrong, but there doesn't seem to be any significant relationship between this item and any other known about Air Pistol designs. If that's right it makes it a "one off rather than a prototype". At a glance it looks as if most of this item could be made up from salvaged parts using rudimentary tools except from the frame and the cocking link which at a guess could well have taken ages to make (unless again, they too are parts salvaged from something else).
Even with a reasonable workshop and based on just looking at it, it would take days to make, and yet it's worth very little today. I can't help thinking that it was a labour of love made for a young lad in austere times.
JMHO, Vic Thompson.
Does it work?