Just been up the club with my Huntsman Classic and the mag has jammed. The little indexing lever thingy at the bottom is stuck in the up position and wont come down.
Anyone know what I can do with this..? Apart from buy another one
GOOD DEALS...Here,post 6404
"corners should be round" Theo Evo .22/.177 - Meopta 6x42, DS huntsman classic .20 vortex razor LH 3-15x42 under supervised boingrati tuning by Tony L & Tinbum, HW77 forest green - Nikon prostaff 2-7x32 plex.
Send it to Daystate and ask them to service it, I did previously and done free of charge
GOOD DEALS...Here,post 6404
I think theres a video on youtube of servicing them, take it apart in a clear plastic bag so any small springs don't get lost though!
GOOD DEALS...Here,post 6404
It is relatively simple to disassemble and clean and reassemble DS mags. There's a thread on the other prominent UK forum, and a video or 2 on YT.
However, When disassembling, make sure you do it inside a clear plastic bag, as there's a tiny spring that will certainly ping out and lose itself on your carpet, between that discarded flip-flop and the old copy of Rustler poking out from under the sofa.
Use the bag when fitting the spring back in on reassembly too. If you lose the sprring - only Drapers seem to stock 'em.
Edit: Looks like you lost your tiny tiny spring. look again in the bottom of your placky bag.
Edit 2 It can also stick to the magnet.
GOOD DEALS...Here,post 6404