Reply With QuoteIt will either be the cocking arms have worn/straightened at the ends, or the cocking slots have worn/deformed. Have a look at the top of the compression tube where the two slots are, is it bowed upward in the centre?
Registered User
I've got a HW45 and when cocking it one or both of the cocking levers come out of the piston. I'm assuming either the levers or the piston itself is worn - but which is more likely? Anyone had any experience of this?
Killer Vampire Lesbians on scooters
It will either be the cocking arms have worn/straightened at the ends, or the cocking slots have worn/deformed. Have a look at the top of the compression tube where the two slots are, is it bowed upward in the centre?
Better to admit you walked through the wrong door than spend your life in the wrong room
Registered User
Thanks - hadn't thought of the tube itself... It was a bit bowed, but not much, the arms still pop out - although further down the slots. I'll try the arms next...
Registered User
had the same issue. local gunsmith charged me £45 for repair, but never thought to ask what the fix was!
Posting Permissions