Page 1 of 2 12 LastLast
Results 1 to 15 of 28

Thread: Air Arms springer - .177 or .22?

  1. #1
    creed Guest

    Air Arms springer - .177 or .22?

    On the assumption I can sell off 1 or 2 pieces of kit,I am toying with the idea of buying a springer.
    I've never fired one in over 30 years and when I came back to shooting bought a PCP.
    Now, I think it might be nice to try the real thing - a springer and will be looking again at Air Arms TX200hc or Prosport in all likelihood.
    My plan is to use it to shoot PL14 targets at 20 yards and maybe 25 metres plus possibly culling some magpies/crows in my garden at a maximum distance of 20 yards.
    My question is whether .177 has any advantage over .22.
    Will it really be more accurate for targets at the distances mentioned above?
    Any difference for pests - it seems the current view is not really any difference?
    Is it that easier to cock a rifle in .22 calibre as opposed to .177 and is it easier to shoot?
    Given my advancing years and arthritic hands it might be conceivably easier to load a .22.
    Any thoughts or advice would be gratefully appreciated.
    Many thanks.

  2. #2
    tinbum's Avatar
    tinbum is offline Killer Vampire Lesbians on scooters
    Join Date
    Aug 2007
    Location
    Daarn Saaarf!
    Posts
    19,799
    At less than 35 yards .177" has nothing but disadvantages.
    Both calibres are the same regarding accuracy
    In the same gun .22 is smoother to shoot than .177 at the same power
    It is also easier to cock
    There is no real trajectory advantage for either at that range
    .22 pellets are easier to pick up and load.
    .22 pellets are less likely to overpenetrate live targets at close range
    Last edited by tinbum; 12-09-2017 at 04:28 PM.
    Better to admit you walked through the wrong door than spend your life in the wrong room

  3. #3
    Join Date
    May 2017
    Location
    sunderland
    Posts
    869
    theres a old saying .177 for feathers and .22 for fur,if ya just want shoot magpies/woodies bit target practice then id say .177 i have two .177 and a .22 and i like .177 better.

  4. #4
    Join Date
    Apr 2004
    Location
    Coventry
    Posts
    5,450
    Quote Originally Posted by creed View Post
    On the assumption I can sell off 1 or 2 pieces of kit,I am toying with the idea of buying a springer.
    I've never fired one in over 30 years and when I came back to shooting bought a PCP.
    Now, I think it might be nice to try the real thing - a springer and will be looking again at Air Arms TX200hc or Prosport in all likelihood.
    My plan is to use it to shoot PL14 targets at 20 yards and maybe 25 metres plus possibly culling some magpies/crows in my garden at a maximum distance of 20 yards.
    My question is whether .177 has any advantage over .22.
    Will it really be more accurate for targets at the distances mentioned above?
    Any difference for pests - it seems the current view is not really any difference?
    Is it that easier to cock a rifle in .22 calibre as opposed to .177 and is it easier to shoot?
    Given my advancing years and arthritic hands it might be conceivably easier to load a .22.
    Any thoughts or advice would be gratefully appreciated.
    Many thanks.
    The ProSport under lever may be a bit uncomfortable for you. Try before you buy. http://bagnallandkirkwood.co.uk/prod...ring-air-rifle

    If you check out the photo's you can see that the under lever is very square, with sharpish edges. I'm sure I've seen on here somewhere that the newer ones have been slightly rounded off, but still best to check it out.
    GOOD DEALS...Here,post 6404

  5. #5
    Join Date
    Dec 2003
    Location
    Cambridge UK
    Posts
    7,147
    Surely if the spring is the same for both calibres (and as far as I know it is for out of the box guns), the cocking effort is the same for both ... except that I can see that if .177 needs more preload then there will be a small increase in effort needed. Personally I have never noticed a difference in cocking effort but agree that in general a .22 can be 'more comfortable' to shoot cf .177.

    .177 pellets are usually cheaper than .22
    Trajectory is flatter so it could be argued that .177 is the easier to shoot as range estimation is more critical for .22. Not sure this is valid though as I know some exceedingly good .22 shooters (they are also good .177 as well) so I guess it all comes down to knowing your kit and your ranges.
    Fur & feather: limited experience tells me there is no difference. Both do the job if pellet is placed correctly.Others may disagree.

    Just thoughts,
    Cheers, Phil

  6. #6
    Join Date
    Aug 2001
    Location
    Walsall, Midlands Uk
    Posts
    11,257
    Go for the .22 without doubt
    Put on heading 270, assume attack formation

  7. #7
    Join Date
    Aug 2013
    Location
    worthing
    Posts
    3,333
    For the purpose described, either calibre will easily do the job. .177 pellets are cheaper, but .22 pellets might be easier for you to load...

  8. #8
    tinbum's Avatar
    tinbum is offline Killer Vampire Lesbians on scooters
    Join Date
    Aug 2007
    Location
    Daarn Saaarf!
    Posts
    19,799
    Quote Originally Posted by rabbitwrecker View Post
    For the purpose described, either calibre will easily do the job. .177 pellets are cheaper, but .22 pellets might be easier for you to load...
    He's not a skin-flint, He's buying an Air Arms, not an HW99!
    Better to admit you walked through the wrong door than spend your life in the wrong room

  9. #9
    Join Date
    Nov 2008
    Location
    Dursley
    Posts
    2,757
    Quote Originally Posted by tinbum View Post
    At less than 35 yards .177" has nothing but disadvantages.
    Both calibres are the same regarding accuracy
    In the same gun .22 is smoother to shoot than .177 at the same power
    It is also easier to cock
    There is no real trajectory advantage for either at that range
    .22 pellets are easier to pick up and load.
    .22 pellets are less likely to overpenetrate live targets at close range
    Well, there are lots of opinions on this but you really need to try before you buy. Based on my own experience of owning a TX in both calibres I would not necessarily agree with points 1, 3, 4 and 5 (above).

    I've never managed to get within 20 yards of a magpie or crow though... magpies seem to drop very easily; crows much tougher.

    The best solution is to go for a .20 of course

  10. #10
    Barryg's Avatar
    Barryg is offline Registered ̶D̶i̶a̶n̶a̶ User
    Join Date
    Jan 2009
    Location
    Nr. YEOVIL
    Posts
    5,156
    With a factory spring I mesuared the cocking effort of my .177 HC at 28 lbs perhaps someone can post the cocking effort of a .22 this might help you make up your mind

  11. #11
    Join Date
    Apr 2012
    Location
    Retford, Notts
    Posts
    37,287
    Quote Originally Posted by Phil Russell View Post
    Surely if the spring is the same for both calibres (and as far as I know it is for out of the box guns), the cocking effort is the same for both ... except that I can see that if .177 needs more preload then there will be a small increase in effort needed. Personally I have never noticed a difference in cocking effort but agree that in general a .22 can be 'more comfortable' to shoot cf .177.

    )
    If I remember correctly, Phil, although the spring may well be the same, the top hats will have different dimensions, increasing/decreasing piston weight and preload, as you describe.

    OP - although many don't have an issue cocking even the .177 HC, if lighter cocking is desirable, maybe consider the .22 full length version?

    But, as Mike says, better to try a few out (maybe even different makes if you're open to that idea).
    THE BOINGER BASH AT QUIGLEY HOLLOW. MAKING GREAT MEMORIES SINCE 15th JUNE, 2013.
    NEXT EVENT :- May 17/18, 2025.........BOING!!

  12. #12
    Join Date
    Dec 2003
    Location
    Cambridge UK
    Posts
    7,147
    Quote Originally Posted by Barryg View Post
    With a factory spring I mesuared the cocking effort of my .177 HC at 28 lbs perhaps someone can post the cocking effort of a .22 this might help you make up your mind
    Good information ... but to make an accurate comparison can you tell us where along the u/l you measured the effort required.
    For example: a scale placed at the very end of the u/l will record less than a scale placed half way along.
    Cheers, Phil

  13. #13
    Join Date
    Dec 2003
    Location
    Cambridge UK
    Posts
    7,147
    [QUOTE=TonyL;7336659]If I remember correctly, Phil, although the spring may well be the same, the top hats will have different dimensions, increasing/decreasing piston weight and preload, as you describe.

    Whoops, yes, I had forgotten that. Senior moment again. Thanks for the reminder TonyL.
    Cheers, Phil

  14. #14
    Barryg's Avatar
    Barryg is offline Registered ̶D̶i̶a̶n̶a̶ User
    Join Date
    Jan 2009
    Location
    Nr. YEOVIL
    Posts
    5,156
    Quote Originally Posted by Phil Russell View Post
    Good information ... but to make an accurate comparison can you tell us where along the u/l you measured the effort required.
    For example: a scale placed at the very end of the u/l will record less than a scale placed half way along.
    Cheers, Phil
    Yes I used bathroom scales at the end of the lever.

  15. #15
    creed Guest
    Thanks for the input,gents.
    Food for thought - I'll try cocking one or two rifles and that might give me more of an idea.
    The forward load position on the TW200 will probably suit me;at least it's not under the scope.
    Thanks to you all again.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •