Results 1 to 9 of 9

Thread: Theoben Gas-ram

  1. #1
    Join Date
    Oct 2002
    Location
    solihull
    Posts
    67

    Theoben Gas-ram

    Any one own a Theoben Evo Gas-ram, I would like some info on one. Cheers Jim.

  2. #2
    Join Date
    Oct 2009
    Location
    aberdeenshire
    Posts
    25,209
    Quote Originally Posted by popsgun View Post
    Any one own a Theoben Evo Gas-ram, I would like some info on one. Cheers Jim.
    I have one. A 2003 or so dated one.
    https://www.dropbox.com/s/q398qcnu7y...92815.png?dl=0

    .22 in a beech stock.
    Last edited by bighit; 18-09-2017 at 06:30 PM.

  3. #3
    Join Date
    Aug 2017
    Location
    Eastbourne
    Posts
    2,226
    I have one. Its around 2006 if I remember rightly. Funnily enough I've just come indoors after a little plinking session with it

  4. #4
    Join Date
    Dec 2005
    Location
    Egginton, Derbys
    Posts
    1,062
    There are lots of nice Evo's out there particular if you get one of those with a better trigger. IMHO you may find that a HE model Fenman or Sirocco with the fixed mounts is nicer to shoot.
    Regards,
    Dave.

  5. #5
    Join Date
    Jul 2004
    Location
    cardiff, south wales.
    Posts
    3,383
    Marmite & I've got 2 Fenmans . Trigger should have been better, but with a little tweaking of the adjustment screws it can be made acceptable. Quiet with an EVO silencer fitted, short sharp firing cycle. Rams can leak, damper weight can seize in the piston, what's not to love. Great if you get a good one though.

    John
    Law of any kind only affects those willing to abide by it.

  6. #6
    Join Date
    Oct 2009
    Location
    aberdeenshire
    Posts
    25,209
    Quote Originally Posted by JLB View Post
    Marmite & I've got 2 Fenmans . Trigger should have been better, but with a little tweaking of the adjustment screws it can be made acceptable. Quiet with an EVO silencer fitted, short sharp firing cycle. Rams can leak, damper weight can seize in the piston, what's not to love. Great if you get a good one though.

    John
    And dont cock the action if it's out of the stock

  7. #7
    Join Date
    Jun 2010
    Location
    St Neots
    Posts
    547
    i have an evo that the gas ram has gone on. funnily enough I just email impact gun to see if they can fix it but its the second email so I'm not expecting a reply again.

    I loved the gun when it shot, for me it was very accurate and a fun gun to shoot, I gave it to a top shot down the club and he couldn't group rounds at all....suits some and not others...

    if anyone knows a guy/place to get it fixed I'm interested.
    Daystate Mk4s & Bushnell Elite 6500; Daystate Merlyn & NVRS; Theoben Evolution & Hawke; TX200 Mk1 & Apollo

  8. #8
    Join Date
    Apr 2002
    Location
    Near Wimbledon, SW London, or Lusaka, Zambia
    Posts
    26,987
    It'll be an easy DIY fix... Just o-rings...
    Always looking for any cheap, interesting, knackered "project" guns. Thanks, JB.

  9. #9
    Join Date
    Oct 2009
    Location
    aberdeenshire
    Posts
    25,209
    Hardly used mine. Not used to shooting it. Was the same with my mates Tx200 too.

    Fine with my nephews Hw80.

    Now wish I had got a Hw80 before the theoben EVO.

    But I will try shooting it more and decide.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •