Page 1 of 2 12 LastLast
Results 1 to 15 of 17

Thread: .45-70 Brass

  1. #1
    Join Date
    Jan 2006
    Location
    Rossendale, Lancashire
    Posts
    1,373

    .45-70 Brass

    I' looking for some .45-70 brass, new or used, can anyone point me in the right direction please?

    I've seen a couple of places online which stock Starline & PPU but that's about all I've found.

    Cheers
    Greg

  2. #2
    Join Date
    Feb 2008
    Location
    Huntingdon
    Posts
    9,253
    Quote Originally Posted by Thegreg View Post
    I' looking for some .45-70 brass, new or used, can anyone point me in the right direction please? I've seen a couple of places online which stock Starline & PPU but that's about all I've found.
    That's because Starline and PPU brass is all that's available here in UK. What are you looking for?

    tac

  3. #3
    Join Date
    Dec 2009
    Location
    leicester
    Posts
    1,600
    I think I have a set of die's and about 100 once fired/new cases in the shed.

  4. #4
    Join Date
    May 2010
    Location
    Rotherham
    Posts
    1,456
    Henry Kranks should have new brass in mate, Love this site


    http://www.henrykrank.com/index.php?main_page=index

  5. #5
    Join Date
    Jan 2006
    Location
    Rossendale, Lancashire
    Posts
    1,373
    Quote Originally Posted by tacfoley View Post
    That's because Starline and PPU brass is all that's available here in UK. What are you looking for?

    tac
    I've seen Remington, Winchester & Hornady brass here before in .45-70. Never thought to ask where it came from because at the time didn't realise that Starline & PPU was all that was available.

    I've used PPU & Starline before in .44 mag and wasn't impressed with the quality of it.

    Thanks for the other replies too guys

    Greg

  6. #6
    Join Date
    Nov 2009
    Location
    brampton
    Posts
    164
    Have you tried wilson & Wilson or Roding armory for brass.
    Bob

  7. #7
    Join Date
    Jan 2008
    Location
    Daventry. Northants.
    Posts
    3,534
    Take my word for it Starline is better then any R+P or WW brass.

    TB.

  8. #8
    Join Date
    Jan 2014
    Location
    Whitchurch
    Posts
    306

    45 70

    Krank usually has Starline in stock, I've had no issues with it I have to say though that I had some Remington cases come with the rifle, only about 50 or so, I don't know how many times they had been reloaded when I got them & I've lost count how many times I've reloaded them, about 6 or so have split at the neck but the rest are still good but the Starline seem to just as durable up to yet.

  9. #9
    Join Date
    May 2010
    Location
    Rotherham
    Posts
    1,456
    If your using new case i would use the lee tool on the inside and outside of the neck, to stop the case splitting, Just to take the sharp edge off

  10. #10
    Join Date
    Jan 2006
    Location
    Rossendale, Lancashire
    Posts
    1,373
    Thanks for the replies guys. I'll probably give Starline a whirl.

    Simon, when you say the "Lee tool" on the inside & outside of the neck do you mean a chamfer/duburr tool?

    Cheers
    Greg

  11. #11
    Join Date
    Dec 2008
    Location
    Ashington, Northumberland
    Posts
    1,178

    45-70

    there is some Federal for sale on gun trader,

  12. #12
    Join Date
    May 2010
    Location
    Rotherham
    Posts
    1,456
    Yes mate, this is it 1 or 2 turns will do it. I use Starline brass
    I also use PPU brass in my 357mag

    http://www.henrykrank.com/index.php?...oducts_id=1592


    The Brass
    http://www.henrykrank.com/index.php?...oducts_id=1036
    Last edited by Simon_S; 19-09-2017 at 04:12 AM.

  13. #13
    Join Date
    Jan 2008
    Location
    grantham
    Posts
    1,507
    Another one for Star-line. Iv used them with black powder and nitro loads and found them excellent. Tim

  14. #14
    Join Date
    May 2010
    Location
    Rotherham
    Posts
    1,456
    I use light load of Trailboss in my rifle, its like black powder but don't have piss out cleaning it
    You get over 350 loads out of bottle. it work out cheaper
    Last edited by Simon_S; 19-09-2017 at 09:25 AM.

  15. #15
    Join Date
    Nov 2007
    Location
    Christchurch
    Posts
    161
    I use Starline brass and Lee dies both available from Henry Krank, not had any issues with them.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •