yup. the best swap is for a 200. otherwise it's emery cloth and polish.
Can you swop barrels on a S400 ??? HOLLY
" BE YOURSELF , EVERYBODY ELSE IS TAKEN "
yup. the best swap is for a 200. otherwise it's emery cloth and polish.
the only thing i can find wrong is the nut on the steering wheel.
How do you separate the barrel from the breech ??? HOLLY
" BE YOURSELF , EVERYBODY ELSE IS TAKEN "
there should be a grub screw in the trigger guard. its very small. cant remember if its 2 or 4 mill. hex you need ,the nice thing is AA put a slot in the trigger guard for access.
only did this twice and its a pain. i swapped the barrel for a BSA superstar barrel.
the only thing i can find wrong is the nut on the steering wheel.
http://www.airgunbbs.com/showthread....-a-s400-barrel
from some one that knows what they are doing
Undo barrel band
Loosen the grub screws on the front ( TOP ) of the breech and hey presto its done !
Some are glued in place so you may have to use a bit of force but not too much .
Many thanks for that ??? HOLLY
" BE YOURSELF , EVERYBODY ELSE IS TAKEN "
Don't forget the 3mm grub screw under the breach on the later models.