Good job...
If you fancy both the HW99 & the .20 calibre, you might find it interesting that my tuner was able to install a .20 HW95 barrel/breech block onto my .22 HW50s with a few tweaks (I think your UK HW99 is identical to our HW50s). The cocking link from the barrel block to the piston had to be slightly shaved down 7/1000s of an inch on both sides to fit, and in one spot in the stock had to be slightly sanded down in the cocking-arm slot to provide a little extra room for the taller breech block.
Works great, I'm getting cloverleaf groups from the bench at 25 yards using H&N Ftt pellets. The Vortek kit is doing 13 fpe. I think the slightly longer barrel makes the rifle a tad easier to cock too.
If you'd like to do the same, take note that my tuner said the dimensions of these parts have changed over the years or are subject to change. Both the .20 barrel/block and my HW50s were purchased new in 2016.
Why not just buy a .20 HW95? I tried a HW95 detuned to 12 fpe but wasn't impressed, the firing cycle felt too long & mushy. The 50s has a quick, sharp, satisfying "whack". The HW95 with the FAC spring is a crackin' gun but to me felt too powerful for pesting around the house, & finally I prefer rifles that are shorter/lighter and less hold sensitive.
Why go thru all this effort? I liked the firing cycle of the larger caliber, & want fewer pass-thrus than a .177 when pesting, and at this power level wanted a flatter trajectory than the .22, so basically I wanted a compromise.
Was it worth it? For me, absolutely. I only want 1 'do it all' springer and this is my prefered springer power, caliber, & rifle. On the way is a CustomStock & Rowan trigger from the UK. Can't wait!
http://i99.photobucket.com/albums/l3...W50s_20Cal.jpg
Last edited by bokes; 21-11-2017 at 06:39 PM.
Good job...
Tony's going to blow his load over this beauty
Pete
Far too many rifles to list now, all mainly British but the odd pesky foreigner has snuck in
Sounds excellent, bokes; enjoy.
Hey Pete, a cheapie little project Supersport may be joining the Hermann Brigade soon.
THE BOINGER BASH AT QUIGLEY HOLLOW. MAKING GREAT MEMORIES SINCE 15th JUNE, 2013.
NEXT EVENT :- May 2025.........BOING!!
Short-stroking the HW95 would have been a far less involved option but, hey, there's always fun in the bigger challenge. And the 99's a lovely, more compact platform.
Reading the OP, Rob, it's the former of your two observations. It'd have to be, taking into account the differences with the stock fixings, slots and bridge.
THE BOINGER BASH AT QUIGLEY HOLLOW. MAKING GREAT MEMORIES SINCE 15th JUNE, 2013.
NEXT EVENT :- May 2025.........BOING!!
Cheers, Pete.
Once I get it and I've had a look inside and assessed condition etc (I'm not expecting great things) I'll decide on what route I may go down. If it's generally okay, the idea of a lighter piston and reducing the stroke is something I think I may try.
For some reason, I do miss not having a BSA break barrel. I had a few many years ago - Super Meteor, Mercury, Challenger, Supersport and a Lightning and that gaping breech in .22 just harks back fond memories. Although a PCP, having a go with Les Allam's Spitfire the other week rekindled that need to thumb a pellet into the BSA breech.
I saw a picture of the gun a few months ago and I seem to remember that the stock has been, er, "customised" somewhat. So, if the action isn't a wreck, doing the stock up tastefully or sourcing a Lightning stock will be in order.
THE BOINGER BASH AT QUIGLEY HOLLOW. MAKING GREAT MEMORIES SINCE 15th JUNE, 2013.
NEXT EVENT :- May 2025.........BOING!!
If it's decent enough then it may be worth getting someone to machine that dreaded breach pin area to accept a Challenger breach bolt and nut set up, I'll have a search for the kit, I got it last year with the hope of finding one of the elusive Supersport SS deluxe models but alas, no joy.
Pete
Far too many rifles to list now, all mainly British but the odd pesky foreigner has snuck in
I was going to wait for the new stock to arrive, but here's a full size. Barrel is .8" longer than the original.
http://i99.photobucket.com/albums/l3...20cal_full.jpg
@rob I'll ask my tuner on tues, he's closed til then. I'm new to springer internals & don't know. I did sent him a Hw95 link, not sure if he used it.