Page 2 of 2 FirstFirst 12
Results 16 to 26 of 26

Thread: polish chronos

  1. #16
    Join Date
    Oct 2012
    Location
    preston
    Posts
    527

    Chrono

    Just a question, is their any way of calibrating it? The reason I asked is the one I tried read higher than my skan. Granted the lighting conditions were not the same so I have given it the benefit of the doubt.
    mk2 rapid.22

  2. #17
    Join Date
    Nov 2005
    Location
    New Milton, Hampshire
    Posts
    14,389
    Quote Originally Posted by bandit2329 View Post
    Hi i have Air chrony MK 3 works fine even in bad light conditions.
    Air Chrony mk3 is not polish or made by the same people

  3. #18
    Join Date
    Nov 2005
    Location
    New Milton, Hampshire
    Posts
    14,389
    Quote Originally Posted by keithy View Post
    Just a question, is their any way of calibrating it? The reason I asked is the one I tried read higher than my skan. Granted the lighting conditions were not the same so I have given it the benefit of the doubt.
    Yes you can move the gate distance to obtain a different reading.

    Bear in mind that although light can be an issue with some chronos, you shouldn't rule out the gun.

  4. #19
    Join Date
    Oct 2012
    Location
    preston
    Posts
    527
    Quote Originally Posted by RobF View Post
    Yes you can move the gate distance to obtain a different reading.

    Bear in mind that although light can be an issue with some chronos, you shouldn't rule out the gun.
    Thanks for the reply I am thinking of getting one as a portable option so I can take snapshots of the power curve of my guns to make sure they are legal throughout the 100 bar range.

  5. #20
    Join Date
    Jan 2010
    Location
    Hull
    Posts
    1,084
    How much are these crono's

  6. #21
    Join Date
    Nov 2005
    Location
    New Milton, Hampshire
    Posts
    14,389
    Quote Originally Posted by keithy View Post
    Thanks for the reply I am thinking of getting one as a portable option so I can take snapshots of the power curve of my guns to make sure they are legal throughout the 100 bar range.
    They're good as a portable chrono.

    Like all chronos they're susceptible to light issues, but we've been using the Polish ones (R2) in csfta as they work in harder conditions than most, even though they're not waterproofed they stand a little weather as well. Lighting wise they work in really low light, even complete darkness. Their weak point is the gates are close to each other, so varying your gun's angle, either up or down, or combined with left and right, off axis means the pellet takes longer to travel the same horizontal distance. And like all chromo's muzzle blast & vapour upsets them. But used right, consistently, they're good and easy to carry around, just need two AA batteries.

    You can get your melons twisted by chronos, but I consider these the next stage up from the combro and for most purposes do what most people need pretty well.

    When I'm being really fussy i'll shoot through this and a CED M2 with this in the middle, and perhaps another.

    Mine's taken a couple of hits, still works. One button doesn't, but then what do you expect after it's been shot?

    What's good is you can shoot through it (turn sideways) and see through the scope, so you can equate what you see at the muzzle with the target... or you can turn it back to normal and stick it down range.

    Cost varies depending on where you got them... they used to be available direct and when the euro was good they were cheaper, but i suspect now they're popular they've probably set up distribution and the euro has slipped so i expect they're more expensive. But after years it's still something that's in my toolkit where as there's other chronos that aren't.

  7. #22
    Join Date
    Oct 2015
    Location
    Western Norway
    Posts
    325
    I've got a R2A, works every time, like it a lot!


  8. #23
    Join Date
    May 2001
    Location
    Wolverhampton
    Posts
    3,584
    Got an R2a as well, avoid but better than the other polish R3 thats worthless last 9 out of 9 times checked.

    Have to put on low sensitivity just fails to register or give wild readings.
    Need controlled light to give an accurate reading LED wont do it and wont work in lower light. Bright light reads way fast. Point is no ones going to be able to tell whats right or wrong blaming other things, same with R3. Couple of times have taken the R2a outdoors it has given readings in the ball park, muzzle 9" back.
    Its only salvation is the higher gate and portability.

  9. #24
    Join Date
    Oct 2002
    Location
    Leighton Buzzard/London
    Posts
    1,582
    Quote Originally Posted by hareng View Post
    Got an R2a as well, avoid but better than the other polish R3 thats worthless last 9 out of 9 times checked.

    Have to put on low sensitivity just fails to register or give wild readings.
    Need controlled light to give an accurate reading LED wont do it and wont work in lower light. Bright light reads way fast. Point is no ones going to be able to tell whats right or wrong blaming other things, same with R3. Couple of times have taken the R2a outdoors it has given readings in the ball park, muzzle 9" back.
    Its only salvation is the higher gate and portability.
    Which one is the R3 Jon? I don't see it on their website:

    https://chrono.lmbr.pl/products.html

    This Polish manufacturer only makes the R2, R2A and R2H as far as I can tell? Unless you are confusing it with the Air Chrony MK3 which is the Czech copy of the Polish Chrono, which is slightly better looking but doesn't work as well as you have described...

  10. #25
    Join Date
    Nov 2005
    Location
    New Milton, Hampshire
    Posts
    14,389
    Quote Originally Posted by nurek View Post
    Which one is the R3 Jon? I don't see it on their website:

    https://chrono.lmbr.pl/products.html

    This Polish manufacturer only makes the R2, R2A and R2H as far as I can tell? Unless you are confusing it with the Air Chrony MK3 which is the Czech copy of the Polish Chrono, which is slightly better looking but doesn't work as well as you have described...
    Yep.

    The R3 is not the Polish Chrono. It's Czech.
    https://www.air-chrony.com/en/content/13-wholesale

    The R3 us what Air Chrony made after selling the R2 Polish Chrono for a while.


    AIR CHRONY s.r.o.
    Lublaňská 1731/19
    120 00 Praha 2
    Czech Republic



    R2 which is the Polish Chrono
    https://chrono.lmbr.pl/products.html

    Made by

    LMBR
    10-687 Olsztyn
    Bartag ul. Cisowa 17
    Poland

  11. #26
    Join Date
    Jun 2009
    Location
    tWatford
    Posts
    137
    Quote Originally Posted by RobF View Post
    Yep.

    The R3 is not the Polish Chrono. It's Czech.
    https://www.air-chrony.com/en/content/13-wholesale

    The R3 us what Air Chrony made after selling the R2 Polish Chrono for a while.


    AIR CHRONY s.r.o.
    Lublaňská 1731/19
    120 00 Praha 2
    Czech Republic



    R2 which is the Polish Chrono
    https://chrono.lmbr.pl/products.html

    Made by

    LMBR
    10-687 Olsztyn
    Bartag ul. Cisowa 17
    Poland
    I have just bought a air chorny mk3, as the r2 was out of stock, SO is this one not as good as the r2 then? it gives a slightly different reading than my, just calibrated chombro? I got the mk3 two weeks ago, maybe i should return it and get the r2 when back in stock?
    Last edited by echo1974; 08-12-2017 at 09:00 PM.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •