-
eyebull,
I had exactly the same thing with my brand hew HW30S I bought late last year (laser etching on breech block, so relatively recent manufacture).
The piston seal was burnt, and also torn, and the spring was very bent (S-shaped).
I had put not one shot through the rifle, when I stripped it down, and found the below.
Did remedial work with the metal-work, put a PTFE block in the cocking arm, and fitted a Vortek PG2 kit.
Shoots sublimely now.
Have fun & a good Sunday
Best regards
Russ
Last edited by PhatMan; 21-01-2018 at 08:34 AM.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules