Page 1 of 3 123 LastLast
Results 1 to 15 of 39

Thread: Not a Giffard, suspiciously like a Greener though

  1. #1
    Join Date
    Jul 2012
    Location
    Middlesbrough
    Posts
    358

    Not a Giffard, suspiciously like a Greener though

    and CO2.
    What the hell is it?







    Liwering the cocking lever rotates the loading port at the top and it is .22 bore (I think, I haven't measured it and dare not put a pellet in it. The Co2 cylinder unscrews easily enough and the gun has a wonderful brown patina. No makers name that I can see though.
    Last edited by Clank; 17-02-2018 at 07:31 PM.
    An Emergency on your part doesn't necessarily mean an Emergency on my part!

  2. #2
    Join Date
    Sep 2010
    Location
    Bruton
    Posts
    6,616
    Looks a lot like a modified Martini cartridge rifle action.

  3. #3
    Join Date
    Jul 2012
    Location
    Middlesbrough
    Posts
    358
    Quote Originally Posted by Geezer View Post
    Looks a lot like a modified Martini cartridge rifle action.
    I did think that, but the action is beautifully smooth and precise. However, on the trigger guard there is what I think to be a proof mark.
    Confounds me that there is no makers name anywhere, nor a number.
    An Emergency on your part doesn't necessarily mean an Emergency on my part!

  4. #4
    Join Date
    Sep 2010
    Location
    Bruton
    Posts
    6,616
    Quote Originally Posted by Clank View Post
    I did think that, but the action is beautifully smooth and precise. However, on the trigger guard there is what I think to be a proof mark.
    Confounds me that there is no makers name anywhere, nor a number.
    It looks to me like a Martini with the top chopped off at an angle and a new bit made to fit (held on by the screw at top right?) that contains the airgun firing mechanism and the rear sight. It has all the features of a Martini - trigger guard, trigger, lever, right-side cocking indicator.

  5. #5
    Join Date
    Jul 2001
    Location
    Tonbridge Kent
    Posts
    2,959
    Can't help with the ID - it is a very pleasing looking rifle and that loading action would make a fast loading piece.

    I would guess that it's a home made affair, there are a few gents on this forum that could make something like that

  6. #6
    Join Date
    Mar 2006
    Location
    City of London
    Posts
    9,896
    Could it be a prototype of a London Giffard?

    https://forum.vintageairgunsgallery....fle/#post-1466
    Vintage Airguns Gallery
    ..Above link posted with permission from Gareth W-B
    In British slang an anorak is a person who has a very strong interest in niche subjects.

  7. #7
    Join Date
    May 2010
    Location
    london and bristol
    Posts
    232

    Giffard

    My thoughts exactly, London Giffard and calibre should be .295.

  8. #8
    Join Date
    Nov 2014
    Location
    beckenham
    Posts
    622
    Ohhh....
    ....that is beautiful. Having a hard time typing as my tongue is hanging out so far and getting in the way.

    The martini action looks so good and 'fit for purpose. Quite logical and lovely.

  9. #9
    Join Date
    Jul 2012
    Location
    Middlesbrough
    Posts
    358
    The more I look at this gun, the more convinced I am rhat it is a Greener, or based on the Greener GP Martini action:




    In one of the pictures above you can see a cross hatched indent for the thumb to rest on. I have seen this somewhere else - just cannot remember where is the problem.
    An Emergency on your part doesn't necessarily mean an Emergency on my part!

  10. #10
    Join Date
    Apr 2012
    Location
    Christchurch
    Posts
    4,916
    Martini Henry thumb rest... dead giveaway. Even has the double line border on it.

    Last edited by Benelli B76; 18-02-2018 at 08:50 AM.
    BE AN INDEPENDENT THINKER, DON'T FOLLOW THE CROWD

  11. #11
    Join Date
    Sep 2004
    Location
    DONCASTER, S/YORKSHIRE.
    Posts
    2,189
    Probably set of as a 303 carbine, more rife than shotgun.
    snarepeg.

  12. #12
    Join Date
    Jun 2006
    Location
    Bath, innit?
    Posts
    6,701
    Remarkable. I wonder who made it and why. They certainly seem to have known what they were doing.

  13. #13
    Join Date
    May 2010
    Location
    london and bristol
    Posts
    232

    Giffard?

    I believe that I may know who created this, if it is a.22 then careful inspection of the barrel may show it to be sleeved with Parker-Hale parker rifling insert. If this is the case, then it will have originated from the one and only Les Westley. Before legislation became too restrictive, he was converting old rook rifles with said insert to CO2.
    So a very good chance it's one of his, though the one I saw was marked with his name.
    HTH

  14. #14
    Join Date
    Apr 2012
    Location
    Christchurch
    Posts
    4,916
    Quote Originally Posted by oldcurmudgeon View Post
    I believe that I may know who created this, if it is a.22 then careful inspection of the barrel may show it to be sleeved with Parker-Hale parker rifling insert. If this is the case, then it will have originated from the one and only Les Westley. Before legislation became too restrictive, he was converting old rook rifles with said insert to CO2.
    So a very good chance it's one of his, though the one I saw was marked with his name.
    HTH
    Yes a lot were sleeved with .22 rimfire barrels, I had one myself, it weighed a ton but supremely accurate. Had a moderator fitted and all you heard was the clink of the hammer on firing. This guy has done a beautiful engineering job with the conversion.

    Baz
    BE AN INDEPENDENT THINKER, DON'T FOLLOW THE CROWD

  15. #15
    Join Date
    Jul 2001
    Location
    Tonbridge Kent
    Posts
    2,959
    So....we need to know calibre and if the barrel has been sleeved - over to you Clank

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •