XTX suggested it mate. The piston does have a tendency to stick if the gun has not been used for a while and a couple of taps on the reg body can dislodge it. I tested the gun again today. It is still spot on with 5 fps spread. I fired 30 15.89 grs AA fields and 20 JSB heavies and the reg is working fine now.
Thanks.
A.G
"corners should be round" Theo Evo .22/.177 - Meopta 6x42, DS huntsman classic .20 vortex razor LH 3-15x42 under supervised boingrati tuning by Tony L & Tinbum, HW77 forest green - Nikon prostaff 2-7x32 plex.
Fair play A.G.
If it works etc.
Many a job on the mowers is cured by the standard issue ... Technical Tap.
From watching the video xtx provides he said that servicing the reg is very difficult.. is this true? I'm a bit poor currently & a huma is a bit of an expensive fix for me at the moment whereas a few orings & my time feels much more cost saving currently if you know what I mean.
Thanks
Rhys
"corners should be round" Theo Evo .22/.177 - Meopta 6x42, DS huntsman classic .20 vortex razor LH 3-15x42 under supervised boingrati tuning by Tony L & Tinbum, HW77 forest green - Nikon prostaff 2-7x32 plex.
"corners should be round" Theo Evo .22/.177 - Meopta 6x42, DS huntsman classic .20 vortex razor LH 3-15x42 under supervised boingrati tuning by Tony L & Tinbum, HW77 forest green - Nikon prostaff 2-7x32 plex.
Always looking for any cheap, interesting, knackered "project" guns. Thanks, JB.
"corners should be round" Theo Evo .22/.177 - Meopta 6x42, DS huntsman classic .20 vortex razor LH 3-15x42 under supervised boingrati tuning by Tony L & Tinbum, HW77 forest green - Nikon prostaff 2-7x32 plex.
Sell it get an HW. Problems solved