Short silencer

[Toby1tyke]

any recommendations for a short moderator for my Rotex.?
Thanks in advance.

[Trumpetier]

Swift Stumpy modular, you can make it as short as you want. At full length it's pretty short anyway.

[robs5230]

another vote her for the stumpy modular. I currently use one on my AA S400 with only 1 mid section inserted out of the 3.

I used to use one on my steyr H5 with only the front and back sections screwed together. All mid sections removed

[DESERT FOX]

Huggett Belita

[Vernal]

One more vote for the Stumpy. With one middle section removed (to fit in my gun cupboard) it makes my LGV wondrously quiet, just wish I could fit one on the LGU too. Belita is prettier, but a fair bit more expensive.

[GB2017]

another vote for the stumpy modular

One more vote for the Stumpy. With one middle section removed (to fit in my gun cupboard) it makes my LGV wondrously quiet, just wish I could fit one on the LGU too. Belita is prettier, but a fair bit more expensive.

you can sir, ramsbottoms sell an adaptor that you unscrew the existing endcap, then fit the adaptor and viola you can fit the mod. Do think they are out of stock at the moment but sure others might have them once you know what you are looking for

atb

[Vernal]

another vote for the stumpy modular




you can sir, ramsbottoms sell an adaptor that you unscrew the existing endcap, then fit the adaptor and viola you can fit the mod. Do think they are out of stock at the moment but sure others might have them once you know what you are looking for

atb

Cor, thanks for that, I really am most grateful. I had thought of making one myself based on the original end cap with a UNF thread attached (someone kindly offered to let me use his lathe), but I am quite happy to wait until JSR have one in stock again if i can't find one elsewhere. End of frequent reminders that the LGU is the loudest gun I have in sight at last! Incidentally, the end cap doesn't unscrew, it pushes in and is held by a grubscrew.

[GB2017]

Cor, thanks for that, I really am most grateful. I had thought of making one myself based on the original end cap with a UNF thread attached (someone kindly offered to let me use his lathe), but I am quite happy to wait until JSR have one in stock again if i can't find one elsewhere. End of frequent reminders that the LGU is the loudest gun I have in sight at last! Incidentally, the end cap doesn't unscrew, it pushes in and is held by a grubscrew.

your welcome, the part number is 604.100

think pelpax and maybe solware had them but they want 30 quid, which is an absolute p155 take

on the continent they are 8 or 9 euros

so you could always chance your arm there, i did

[bullet boy]

Huggett Mini Belita 🤙

[Barryg]

Swift Stumpy modular, you can make it as short as you want. At full length it's pretty short anyway.

I Like it

do you think it it better than the old air logic

[Trumpetier]

I Like it

do you think it it better than the old air logic

Never used an Air Logic, but it looks very smart