As above , I know that elder fud used to make them but does anyone know if anyone makes then now please?
Unfortunately Rowan don’t do one for the wolverine barrel
What is so special about the Wolverine barrel?
www.shebbearshooters.co.uk. Ask for Rich and try the coffee
theres a lad called mattw975 on makes silencers ect he might be able help ya.
Have you checked our sponsors website? JS Ramsbottom do loads at great prices.
WANTED: Next weeks winning lottery numbers :-)
Do you want it to fit the barrel then and not the shroud?
I thought there was a screwed plug in the end of the shroud with a cap on the end to protect the thread.
If I get this right you want a fitting with 12mm bore to go over the barrel, and presumably a couple of grub screws to lock it into position, then a 1/2 inch UNF male thread long enough for a silencer to screw onto.
www.shebbearshooters.co.uk. Ask for Rich and try the coffee
I've tried the 12 mm from js ramsbottom but it doesn't fit bizarly enough.
I've taken the shroud off because the pellets kept clipping it and ruining accuracy.
I've mailed rowen engineering now to see if they can help, failing that I will get it screw cut and re blued.
In what way does the JSR not fit?
I mean, I could make you one easily enough so long as the dimensions were there to work to.
www.shebbearshooters.co.uk. Ask for Rich and try the coffee
Just like to say a big thank you to Rich who came to my rescue and knocked up an adapter in double quick time.
The only problem was me who measured it wrong🤨. For the record the Daystate wolverine barrel size is 12.95 mm.
Luckily my mate has a laithe and he opened up the bore, adaptor now on barrel👍