Quick update on the whizzers.
Starting to stich all the bought and made parts together now
https://ibb.co/ceYj6e
Total cost of what you see here is £36! Basically just the motors, the rest is made from stock I already had.
Quick update on the whizzers.
Starting to stich all the bought and made parts together now
https://ibb.co/ceYj6e
Total cost of what you see here is £36! Basically just the motors, the rest is made from stock I already had.
Looks nice.
I wonder what 50m of that ducting would cost
10.2m cost me £260 as a back hander in cash !
More whizzer updates.
https://ibb.co/khD0xK
Just need to make the covers now.
Hi Mick,
Torque is not a problem, drive belt slip and gearing up are problems I've had.
Gearing up is easy, but belt slippage is more of an issue.
For now, I've solved it, but the belts are a little stretchy and they may slacken off over time?
If you made the gears out of push bike sprockets from the front and back,you'd have it cracked !!
Somthing I may end up doing, but for now, it's all working fine
Replacing the pulleys for bike sprockets is very easy, just turn the pulleys down 3mm and bolt on the sprockets.
You can buy whole new matching bike sprockets (cassettes) and chain from Crapbay for peanuts!
Belt slippage, try using bigger pulleys.
www.shebbearshooters.co.uk. Ask for Rich and try the coffee