Results 1 to 15 of 15

Thread: Scope rings for BSA Airsporter Mark 2?

  1. #1
    Join Date
    Jan 2016
    Location
    Wooster
    Posts
    3,664

    Scope rings for BSA Airsporter Mark 2?

    I have a BSA Airsporter Mark 2 with the 2 separate scope ring grooves. The gap is pretty wide, are there any scope rings that will fit these. The open site folds down and is to me not the easiest to use effectively.

  2. #2
    Join Date
    Jun 2014
    Location
    Chester
    Posts
    5,486
    Three quarter of an inch dovetails,protek supplies perhaps?

  3. #3
    Join Date
    Feb 2007
    Location
    Bournemouth
    Posts
    2,281
    I think the wide dovetails were designed to accept mounts by Parker Hale.

    Lakey

  4. #4
    Join Date
    Jan 2016
    Location
    Wooster
    Posts
    3,664
    Quote Originally Posted by piggy589 View Post
    Three quarter of an inch dovetails,protek supplies perhaps?
    Dovetail are more like 5/8th inch?

    Here is the answer but been out of stock forever.

    http://www.airgunspares.com/store/pr...AASADAPTBLOCK/

  5. #5
    Join Date
    May 2007
    Location
    Penarth, Vale of Glamorgan. Near Cardiff
    Posts
    358

    Mk 2 Airsporter Scope Mounts

    Good Morning.

    A few years back I was having the same problem. I sourced some mounts through Michael Tawn.
    They were Sportsmatch TO48. They also fit the Mk1 and Mk2 Meteor they did the job perfectly.

    Hope this helps.

    Musicman.

  6. #6
    Join Date
    Jan 2016
    Location
    Wooster
    Posts
    3,664
    Quote Originally Posted by musicman View Post
    Good Morning.

    A few years back I was having the same problem. I sourced some mounts through Michael Tawn.
    They were Sportsmatch TO48. They also fit the Mk1 and Mk2 Meteor they did the job perfectly.

    Hope this helps.

    Musicman.
    Thanks good lead, those are 15mm and they make 17mm as well. Need to make a precise measurement that seems to be very close to what I was crudely measuring.

  7. #7
    Join Date
    Jun 2014
    Location
    Chester
    Posts
    5,486
    Two piece medium height one inch tube mounts available from Mr Knibbs at £25.

  8. #8
    Join Date
    Jan 2016
    Location
    Wooster
    Posts
    3,664
    Quote Originally Posted by musicman View Post
    Good Morning.

    A few years back I was having the same problem. I sourced some mounts through Michael Tawn.
    They were Sportsmatch TO48. They also fit the Mk1 and Mk2 Meteor they did the job perfectly.

    Hope this helps.

    Musicman.
    I think you hit it, this is the only ring out there I can find that fits, only in England but found on the bay, they will ship to USA.

  9. #9
    Join Date
    Jul 2006
    Location
    sheffield
    Posts
    6,719

    Thumbs up

    Quote Originally Posted by 45flint View Post
    Dovetail are more like 5/8th inch?

    Here is the answer but been out of stock forever.

    http://www.airgunspares.com/store/pr...AASADAPTBLOCK/
    You're spot on flint, I bought this set of Japanese 5/8" mounts from the Melbourne vintage airgun fayre and they fitted my mk2 Meteor superbly, The mk1/2 Meteors had exactly the same types of short scope railes that the mk2 Airsporter had (Apart from the transitional mk2/mk3's that had one pair of narrower dovetails cut in)







    Cheers, John
    for my gunz guitarz and bonzai, see here
    www.flickr.com/photos/8163995@N07/

  10. #10
    Join Date
    Jan 2016
    Location
    Wooster
    Posts
    3,664
    Quote Originally Posted by johnbaz View Post
    You're spot on flint, I bought this set of Japanese 5/8" mounts from the Melbourne vintage airgun fayre and they fitted my mk2 Meteor superbly, The mk1/2 Meteors had exactly the same types of short scope railes that the mk2 Airsporter had (Apart from the transitional mk2/mk3's that had one pair of narrower dovetails cut in)







    Cheers, John
    Curious if they were stated as 5/8th inch or in mm?

  11. #11
    Join Date
    Jul 2006
    Location
    sheffield
    Posts
    6,719

    Thumbs up

    Quote Originally Posted by 45flint View Post
    Curious if they were stated as 5/8th inch or in mm?
    It actually states the imperial size (5/8") on the edge of the box, No mention of metric at all


    Just found a pic and uploaded it to imgur




    Cheers, John
    for my gunz guitarz and bonzai, see here
    www.flickr.com/photos/8163995@N07/

  12. #12
    Join Date
    Jan 2016
    Location
    Wooster
    Posts
    3,664
    Bad news the Sportsmatch rings above will fit the Meteor but not the Airsporter per the English gun shop that sells them on the bay. They bottom out. Don’t know if there is enough room to grind them higher?

  13. #13
    Join Date
    Jan 2016
    Location
    Wooster
    Posts
    3,664
    Hard to believe but just got some Parker Hale 1 inch scope rings for 5/8 rail on the bay from Australia. Used but look in good shape. Keeping my fingers crossed, till they arrive. Probably my best shot at getting something that will work.
    Last edited by 45flint; 24-10-2018 at 09:33 AM.

  14. #14
    Join Date
    Jul 2006
    Location
    sheffield
    Posts
    6,719

    Thumbs up

    Quote Originally Posted by 45flint View Post
    Hard to believe but just got some Parker Hale 1 inch scope rings for 5/8 rail on the bay from Australia. Used but look in good shape. Keeping my fingers crossed, till they arrive. Probably my best shot at getting something that will work.
    Hi Flint

    I won these on flreabay, These came from Australia and are windage adjustable as well as size adjustable, I fitted them to a BSA Lightning with the 14mm maxigrip mount, They did the job fine when I was having trouble finding mounts to fit!!




    Cheers, John
    for my gunz guitarz and bonzai, see here
    www.flickr.com/photos/8163995@N07/

  15. #15
    Join Date
    Jan 2016
    Location
    Wooster
    Posts
    3,664
    Nothing is easy and not sure it will align properly cause I don’t have a 1 inch tube scope that fits this spacing yet. But I got some old Parker Hale 5/8 rings. The groves in the receiver are so far down they bottomed out. Ground the bottoms enough to clear but I bet alignment of scope will be a challenge.





    Last edited by 45flint; 08-11-2018 at 02:02 PM.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •