Results 1 to 10 of 10

Thread: kral np02

  1. #1
    Join Date
    Jul 2008
    Location
    glamorgan
    Posts
    1,068

    kral np02

    Just had a new kral np02 in 177,,,ive put a discovery 40mm ao scope on it,,,kral silencer,,,,this a great little gun had the lot for under 500 pounds,,,,so far so good,,,,ive found the exact heavies suit the gun,,,only issue was the trigger it seemed to be a longer travel than my other guns ,,ive had the trigger sorted and seems fine,,,,great little gun,,

  2. #2
    Join Date
    May 2000
    Location
    Very southeast
    Posts
    44,233
    Quote Originally Posted by ferrets123 View Post
    Just had a new kral np02 in 177,,,ive put a discovery 40mm ao scope on it,,,kral silencer,,,,this a great little gun had the lot for under 500 pounds,,,,so far so good,,,,ive found the exact heavies suit the gun,,,only issue was the trigger it seemed to be a longer travel than my other guns ,,ive had the trigger sorted and seems fine,,,,great little gun,,
    I've been using one for a while, apart from trigger adjustment it's not needed anything, shoots great and best value for money gun available imo
    Baz
    ____________________________
    Accuracy is everything!

    http://www.wildcatrifles.co.uk/

  3. #3
    Join Date
    May 2016
    Location
    BOLTON
    Posts
    830
    I've had a go with mates kral I did a trigger job on it and have to say its a great airgun for the money its well made accurate and reliable the trigger is a bit iffy out of the box but suppose no guns perfect but its trigger mech can be sorted with a bit fettling theirs worst trigger on guns that cost a lot more rapid mk1 springs to mind lol

    Dave.

  4. #4
    Join Date
    Dec 2011
    Location
    blackburn
    Posts
    2,036
    Quote Originally Posted by DM80 View Post
    I've had a go with mates kral I did a trigger job on it and have to say its a great airgun for the money its well made accurate and reliable the trigger is a bit iffy out of the box but suppose no guns perfect but its trigger mech can be sorted with a bit fettling theirs worst trigger on guns that cost a lot more rapid mk1 springs to mind lol

    Dave.
    Dave ,
    Would there be any benefit from putting a reg in it ?
    Would the shot count go up or should we just be happy that it's a 3rd of the price of some other rifles .

  5. #5
    Join Date
    May 2016
    Location
    BOLTON
    Posts
    830
    Think it would be to much hassle fitting a reg because of the layout of the air cylinders it would be a lot of work positioning the regulator and don't think it would be cheap but it can be done but to be fair they are ok as they are they have a good shotcount they are consistent and they also don't have a massive power curve like earlier Turkish guns they really are getting their and you can't really fault them for the price,
    They are also very good at Fac levels I tuned one to 25ftb it shoots well and has a good shot count around 60 that's pritty good for an unregged fac pcp.

    Dave.

  6. #6
    Join Date
    Dec 2011
    Location
    blackburn
    Posts
    2,036
    Thanks Dave
    I'm loving mine .

  7. #7
    tinbum's Avatar
    tinbum is offline Killer Vampire Lesbians on scooters
    Join Date
    Aug 2007
    Location
    Daarn Saaarf!
    Posts
    19,799
    Is there any way of reducing the excessive LOP? Ot looks like theres a lot of material behind the back of the bottle, would it be possible to shorten it at all?
    Better to admit you walked through the wrong door than spend your life in the wrong room

  8. #8
    Join Date
    Feb 2009
    Location
    bideford
    Posts
    2,990
    Quote Originally Posted by tinbum View Post
    Is there any way of reducing the excessive LOP? Ot looks like theres a lot of material behind the back of the bottle, would it be possible to shorten it at all?
    Check this out Nick.
    It may cure the LOP
    https://www./itm/Airsoft-paintball-k...Z33:rk:10:pf:0
    B.A.S.C. member

  9. #9
    Join Date
    May 2000
    Location
    Very southeast
    Posts
    44,233
    Quote Originally Posted by robs5230 View Post
    Check this out Nick.
    It may cure the LOP
    https://www./itm/Airsoft-paintball-k...Z33:rk:10:pf:0
    I've got one of those, they work but the buttpad is only bolted into plastic and thread isn't tough enough to tighten enout to stop pad moving

    I got a scope with longer eye relief, job done
    Baz
    ____________________________
    Accuracy is everything!

    http://www.wildcatrifles.co.uk/

  10. #10
    tinbum's Avatar
    tinbum is offline Killer Vampire Lesbians on scooters
    Join Date
    Aug 2007
    Location
    Daarn Saaarf!
    Posts
    19,799
    Quote Originally Posted by baz View Post
    I've got one of those, they work but the buttpad is only bolted into plastic and thread isn't tough enough to tighten enout to stop pad moving

    I got a scope with longer eye relief, job done
    Oh, eye releif isn't my main concern, I have penguin arms so would struggle holding the damn thing. Rickenbacker has a Skan with a similar issue, but that's funny cos it's his expensive hunk of junk!
    Better to admit you walked through the wrong door than spend your life in the wrong room

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •