Page 1 of 4 123 ... LastLast
Results 1 to 15 of 53

Thread: Results : Muscle Power League 2019, Spring/Summerr Series

  1. #1
    Join Date
    Jul 2015
    Location
    Hastings
    Posts
    1,498

    Results : Muscle Power League 2019, Spring/Summerr Series

    Hello to All,


    Here be the thread for the posting of the results for the MPL Spring/Summer 2019 Competitions.


    Many thanks


    Good shooting !


    Have fun


    Best regards


    Russ





    *******************************


    January MPL Rifle


    RobTheDog : Weihrauch HW99S : RWS Hobby : 46 + 43 + 46 + 46 + 45 + 46 = 272


    Bart49 : Original Model 75 HV : RWS Meisterkugeln 4.50 : 46 + 41 + 42 + 44 + 43 + 49 = 265


    zooma : Walther LGM + 2 : RWS Meisterkugeln (pistol) : 41 + 43 + 44 + 45 + 45 + 46 = 264


    KennyB : Feinwrkbau 300S : H&N Finale Match : 40 + 41 + 46 + 37 + 42 + 41 = 247


    PhatMan : Anschutz 335 Mk2 : RWS R10 Pistol : 39 + 34 + 37 + 42 + 33 + 36 = 221


    *******************************


    January MPL Pistol


    Paul SE : Weihrauch HW75 : RWS Meisterkugeln : 42 + 43 + 37 + 43 + 43 + 37 = 245


    PhatMan : Diana Mod 5G : RWS R10 Pistol : 42 + 34 + 38 + 30 + 33 + 34 = 211


    KennyB : Feinwerkbau 80 : H&N Finale Match : 44 + 38 + 31 + 30 + 34 + 33 = 210


    *******************************


    January MPL Supported Rifle


    zooma : Feinwerkbau P70 (Red) : RWS Meisterkugeln 4.50 : 49 + 50 + 50 + 49 + 49 + 50 = 297


    SoftTop : TESRO RS100 : RWS Meisterkugeln 4.50 : 50 + 50 + 48 + 48 + 49 + 49 = 294


    Bart49 : Feinwerkbau P70 (Blue) : RWS Meisterkugeln 4.50 : 50 + 48 + 47 + 50 + 48 + 48 = 291


    *******************************

    February MPL Rifle


    RobTheDog : Weihrauch HW99S : RWS Hobby : 47 + 45 + 45 + 44 + 47 + 47 = 275

    Bart49 : Original Model 75 HV : RWS Meisterkugeln 4.50 : 42 + 44 + 46 + 45 + 43 + 45 = 265


    Kenny B (Kennyb) : Feinwerkbau 300S : RWS Geco : 46 + 34 + 45 + 41 + 43 + 43 = 252


    PhatMan : Hatsan 55 : RWS R10 Pistol : 31 + 38 + 42 + 36 + 38 + 38 = 223


    *******************************


    February MPL Pistol


    Paul SE : Weihrauch HW75 : RWS Meisterkugeln : 39 + 44 + 46 + 43 + 46 + 42 = 260


    PhatMan : 1948 Diana Mod 5 : RWS R10 Pistol : 32 + 36 + 33 + 38 + 41 + 40 = 220


    KennyB : Feinwerkbau 80 : RWS Geco : 40 + 33 + 33 + 32 + 38 + 26 = 202


    *******************************


    February MPL Supported Rifle


    Bart49 : Feinwerkbau P70 (Blue) : RWS Meisterkugeln 4.50 : 50 + 49 + 50 + 50 + 50 + 49 = 298


    zooma : Feinwerkbau P70 (Red) : RWS Meisterkugeln 4.50 : 50 + 49 + 49 + 50 + 48 + 50 = 296


    SoftTop : TESRO RS100 : RWS Meisterkugeln 4.50 : 50 + 48 + 49 + 49 + 48 + 50 = 294


    *******************************


    March MPL Rifle


    RobTheDog : Weihrauch HW99S : RWS Hobby : 45 + 46 + 46 + 45 + 44 + 45 = 271


    PhatMan : Anschutz 335 Mk2 : RWS R10 Pistol : 34 + 38 + 38 + 36 + 41 + 38 = 225


    *******************************


    March MPL Pistol


    tcas146 : Original 6M : RWS Meisterkugeln : 44 + 45 + 42 + 38 + 41 + 44 = 254


    Paul SE : Weihrauch HW75 : RWS Meisterkugeln Pistol : 39 + 43 + 39 + 41 + 41 + 38 = 241


    PhatMan : Diana Mod 5G : RWS R10 Pistol : 37 + 41 + 40 + 37 + 42 + 30 = 227


    *******************************


    March MPL Supported Rifle


    Bart49 : Feinwerkbau P70 (Blue) : RWS Meisterkugeln 4.50 : 50 + 48 + 49 + 49 + 50 + 50 = 296


    Zooma : Feinwerkbau P70 (Red) : RWS Meisterkugeln 4.50 : 48 + 49 + 49 + 50 + 50 + 49 = 295

    SoftTop : TESRO RS100 : RWS Meisterkugeln 4.50 : 49 + 48 + 48 + 48 + 48 + 48 = 289


    *******************************


    April MPL Rifle


    RobTheDog : Weihrauch HW99S : JSB Exact : 48 + 47 + 46 + 45 + 46 + 46 = 278


    PhatMan : Diana 35 : RWS R10 Pistol : 36 + 42 + 42+ 40 + 37 + 43 = 240


    *******************************


    April MPL Pistol


    tcas146 : Original 6M : RWS Basic : 40 + 44 + 42 + 43 + 42 + 42 = 253


    Paul SE : Weihrauch HW75 : RWS Meisterkugeln Pistol : 37 + 42 + 41 + 34 + 43 + 43 = 240


    PhatMan : Gamo Centre : JSB Match (Green) : 38 + 44 + 41 + 35 + 36 + 39 = 233


    *******************************


    April MPL Supported Rifle


    Zooma : Feinwerkbau P70 (Red) : RWS Meisterkugeln 4.50 : 50 + 49 + 50 + 50 + 50 + 50 = 299


    SoftTop : TESRO RS100 : RWS Meisterkugeln 4.50 : 49 + 49 + 50 + 49 + 49 + 49 = 295


    Bart49 : Feinwerkbau P70 (Blue) : RWS Meisterkugeln 4.50 : 49 + 49 + 50 = 48 + 50 + 49 = 295


    *******************************


    May MPL Rifle


    RobTheDog : Weihrauch HW99S : RWS Hobby : 48 + 47 + 46 + 45 + 44 + 43 = 273


    PhatMan : Diana 35 : RWS R10 Pistol : 41 + 43 + 39 + 40 + 39 + 41 = 243


    *******************************


    May MPL Pistol


    Paul SE : Weihrauch HW75 : RWS Meisterkugeln Pistol : 40 + 38 + 42 + 43 + 46 + 46 = 255


    tcas146 : Original 6M : RWS basic : 41 + 38 + 40 + 42 + 46 + 39 = 246


    PhatMan : Diana Mod 5G : RWS R10 Pistol : 42 + 39 + 43 + 34 + 40 + 39 = 237


    *******************************


    May MPL Supported Rifle


    Zooma : Feinwerkbau P70 (Red) : RWS Meisterkugeln 4.50 : 49 + 50 + 50 + 50 + 50 + 49 = 298


    SoftTop : TESRO RS100 : RWS Meisterkugeln 4.50 : 50 + 49 + 50 + 50 + 49 + 49 = 297


    Bart49 : Feinwerkbau P70 (Blue) : RWS Meisterkugeln 4.50 : 49 + 49 + 48 + 49 + 49 + 50 = 294


    *******************************


    June MPL Rifle


    RobTheDog : Weihrauch HW99S : RWS Hobby : 44 + 46 + 47 + 44 + 43 + 43 = 267


    PhatMan : Haenel 312 : JSB Match (Blue) : 44 + 46 + 38 + 43 + 37 + 44 = 252


    *******************************


    June MPL Pistol


    Paul SE : Weihrauch HW75 : RWS Meisterkugeln Pistol : 39 + 44 + 35 + 40 + 43 + 43 = 244


    PhatMan : 1948 Diana Mod 5 : RWS R10 Pistol : 38 + 38 + 42 + 38 + 43 + 41 = 240


    *******************************


    June MPL Supported Rifle


    Bart49 : Feinwerkbau P70 (Blue) : RWS Meisterkugeln 4.50 : 49 + 50 + 50 + 49 + 49 + 50 = 297


    SoftTop : TESRO RS100 : RWS Meisterkugeln 4.50 : 50 + 50 + 50 + 48 + 48 + 50 = 296


    Zooma : Feinwerkbau P70 (Red) : RWS Meisterkugeln 4.50 : 50 + 49 + 49 + 49 + 50 + 49 = 296


    *******************************


    Overall Score table for Spring/Summer Series Muscle Power League 2019


    MPL Rifle


    RobTheDog : 272 + 275 + 271 + 278 + 273 + 267 = 1636


    PhatMan : 221 + 223 + 225 + 240 + 243 + 252 = 1404


    zooma : 264 = 264


    Bart49 : 265 + 265 = 530


    KennyB : 247 + 252 = 499




    MPL Pistol


    Paul SE : 245 + 260 + 241 + 240 + 255 + 244 = 1485


    PhatMan : 211 + 220 + 227 + 233 + 237 + 240 = 1368


    tcas146 : 254 + 253 + 246 = 753

    KennyB : 210 + 202 = 412




    MPL Supported Rifle


    zooma : 297 + 296 + 295 + 299 + 298 + 296 = 1781


    Bart49 : 291 + 298 + 296 + 295 + 294 + 297 = 1771


    SoftTop : 294 + 294 + 289 + 295 + 297 + 296 = 1765




    Last edited by PhatMan; 05-07-2019 at 08:32 AM.

  2. #2
    Join Date
    May 2009
    Location
    Herne Village, Herne Bay, Kent
    Posts
    1,892
    Oooh look, I’m in the lead

    Thanks for posting the results Russ, and Good Luck to everyone who is shooting in the MPL comps
    ATB, Paul
    Always looking for new members at the Swalecliffe and District TSC in sunny Herne Bay
    http://www.sanddtsc.org.uk/

  3. #3
    Join Date
    Jul 2015
    Location
    Hastings
    Posts
    1,498
    Hello to All,

    Scores update Sunday, 20190113.

    Paul - you are still in the lead in the pistol

    Have fun & a good Sunday

    Best regards

    Russ

  4. #4
    Join Date
    Jul 2015
    Location
    Hastings
    Posts
    1,498
    Hello to All,

    Thought I would campaign in the MPL a new-to-me rifle I bought over the Christmas holiday

    It is an Anschutz 335 Mk2 (in 0.177").

    The Annie is in very nice condition, though very 'twangy' at the moment.

    It is making around 8.6 ft.lb with JSB Express (ca. 700 fps, 7.88 gr.), which is fine

    Have fun & a good Sunday

    Best regards

    Russ

  5. #5
    Join Date
    Mar 2010
    Location
    Rossendale and Formby
    Posts
    5,606
    Quote Originally Posted by PhatMan View Post
    Hello to All,

    Thought I would campaign in the MPL a new-to-me rifle I bought over the Christmas holiday

    It is an Anschutz 335 Mk2 (in 0.177").

    The Annie is in very nice condition, though very 'twangy' at the moment.

    It is making around 8.6 ft.lb with JSB Express (ca. 700 fps, 7.88 gr.), which is fine

    Have fun & a good Sunday

    Best regards

    Russ

    Another spring powered air rifle to choose from Russ - and a classic too!

    I am sure that you will be "refining" the rifles performance and the cause of the "twang" will be found and taken care of very soon.

    Let us know what you found and how you fixed it.

    Bob.
    Rossendale Target Shooting Club. Every Tuesday and Thursday evening 7 - 10pm.

  6. #6
    Join Date
    Mar 2010
    Location
    Rossendale and Formby
    Posts
    5,606
    I borrowed the rear sight off of my Walther LG400 Anatomic to use on my HW99S as I don't have anything else "spare" that will fit this rifle at the moment, and although it is a very good diopter sight (a superb sight actually), the recoil shock of the springer keeps bouncing it backward along the mounting rails as it has no facility to mount an arrestor screw to stop it shifting.

    As I don't want to risk damaging this sight I have put it back onto my match rifle and I used my Walther LGM-2 SSP rifle for the first round of this Spring/Summer MPL rifle competition.

    This is a lovely "junior" sized classic SSP rifle that is great to shoot, and with a younger (and better) shooter holding it, I am sure that it would probably be capable of some amazingly good scores at 6 yards (and 10 meters).

    However, I will be returning to shooting my HW99S as soon as I can find a suitable diopter (with arrestor screw). I do have a really nice "left handed" Anschutz diopter fitted to my HW30S that I could remove and fit, but it is a really tight fit on the rifle and makes me sweat every time a have to"drift" it off, and despite the small size of the HW30S giving me problems with fitting it to my old and knackered frame it shoots absolutely superbly and I am reluctant to disturb it!

    So, I am on the hunt for a similar old Anschultz diopter (or similar) to fit onto my HW99S and meanwhile I will use the excuse to exercise a couple of my other MPL air rifles until I find something suitable to fit it.
    Last edited by zooma; 01-02-2019 at 01:49 PM.
    Rossendale Target Shooting Club. Every Tuesday and Thursday evening 7 - 10pm.

  7. #7
    Join Date
    Jul 2016
    Location
    Grantham
    Posts
    1,430
    I have my 99 with the Williams sight i got off you tuned in at 6yds, but would like to shoot at 10m as well, guess i need another rifle then....

  8. #8
    Join Date
    Jul 2015
    Location
    Hastings
    Posts
    1,498
    Bob,

    I use the Gehmann 590 sights on a few of my rifles (HW30S, HW99S, & HW95 SuperMatch).

    https://gehmann.com/english/products...2&kategorie=22

    The clamping on the 590's is designed for rimfires/PCPs, so is not as 'fierce' as is needed on a 'full-power' springer

    I have drilled and tapped the mount body of these sights, to take an M3 bolt to engage in the arrestor holes in the HWs cylinders - works very nicely

    The issue with the 'fully milled' Anschutz 6xxx sights, is that the base is split lengthways, so is very difficult to fit an arrestor bolt.

    ( However, I have an Anschutz 6502 'fully-milled' on my Anschutz 335 Mk2, and so far, touch wood, it has not moved/slipped yet.)

    The 'cast' Anschutz sights (e.g. on late model Webley Mk3 SuperTargets) do have a facility for use of an arrestor bolt.

    Have fun

    Best regards

    Russ

  9. #9
    Join Date
    Mar 2010
    Location
    Rossendale and Formby
    Posts
    5,606
    Quote Originally Posted by PhatMan View Post
    Bob,

    I use the Gehmann 590 sights on a few of my rifles (HW30S, HW99S, & HW95 SuperMatch).

    https://gehmann.com/english/products...2&kategorie=22

    The clamping on the 590's is designed for rimfires/PCPs, so is not as 'fierce' as is needed on a 'full-power' springer

    I have drilled and tapped the mount body of these sights, to take an M3 bolt to engage in the arrestor holes in the HWs cylinders - works very nicely

    The issue with the 'fully milled' Anschutz 6xxx sights, is that the base is split lengthways, so is very difficult to fit an arrestor bolt.

    ( However, I have an Anschutz 6502 'fully-milled' on my Anschutz 335 Mk2, and so far, touch wood, it has not moved/slipped yet.)

    The 'cast' Anschutz sights (e.g. on late model Webley Mk3 SuperTargets) do have a facility for use of an arrestor bolt.

    Have fun

    Best regards

    Russ
    Thanks for the info Russ.

    The Anschutz sight that I have on my HW30S is a really tight fit and has simply never budged during use.

    It is such a tight fit that I have to "encourage it" to slide along the cylinder dovetails to get it into position, and taking it off again needs the same process in reverse!

    I was given this "left handed" sight by Robin Carter some years ago and have always enjoyed using it. The "left handed" bit only means that the windage adjusting knob is on the left hand side rather than being mounted on the regular right hand side, and to be honest in use it makes no difference to me whatsoever - but if it was mounted on a rifle used for prone shooting then it probably would be a bit less helpful as I am right handed!

    Funnily enough I have another rear sight on my Walther LGM-2 that also has the windage knob mounted on the left hand side - it is a "Swiss Made Elite 201". This is a lovely looking rear sight that I really like and it suites the LGM-2 a treat, but I have only ever seen one other and that also had the windage adjustor on the left hand side so maybe that's the way they were made?

    The Gehmann 590 is a really good well made sight that I use on my Walther LG300XT ProTouch and it would be nice to fit one to my HW99S and tap the body as you suggest to fit a grub screw to use as the "arrester".

    Interestingly enough I see that you can also order a left handed Gehmann 590 (see the link below) but it costs an extra £15 to have the windage knob mounted on the left hand side!

    https://www.intershoot.co.uk/acatalo....htmlAvailable here
    Last edited by zooma; 02-02-2019 at 10:29 AM.
    Rossendale Target Shooting Club. Every Tuesday and Thursday evening 7 - 10pm.

  10. #10
    Join Date
    Jul 2015
    Location
    Hastings
    Posts
    1,498
    Bob,

    Indeed - one of my Anschutz 6702s had to be modified to fit on my TX200 (the TXs dovetails are slightly too wide for the sight). About 1mm had to be milled off the bottom of the 6702s mount.

    As an aside, the dovetails on my FWB602 are too wide to fit the 6702 sights at all.

    Have fun & a good Sunday

    Best regards

    Russ

  11. #11
    Join Date
    Jul 2015
    Location
    Hastings
    Posts
    1,498
    Hello to All,

    Scores updated Sunday, 20190203

    For a real challenge, I used my 0.177" Hatsan 55 for February's MPL Rilfe round.

    A 340 g piston (at ca. 10 ft.lb) sure makes shooting interesting !!

    The 55s Quattro trigger was surprsingly effective for target use.

    The pull was very crisp, but not particularly light - ca. 3 to 4 lb.

    If any of you have a Hatty, dig it out and use it in the MPL

    Have fun & a good Sunday,

    Best regards

    Russ

  12. #12
    Join Date
    Mar 2010
    Location
    Rossendale and Formby
    Posts
    5,606
    Funnily enough Russ, I have been looking at buying a Hatsun - I really like the look of the Dominator.

    There was a nice looking example for sale here on the BBS recently but it was about the time that the snow came along a bit sooner than expected and I was in the middle of getting my roof finished (and weather proofed) at the time so I was a way from the BBS for a few days and lost touch.

    Having said that, it may not have made a very good MPL rifle in any case, and of course I would have had the problem of finding or making a suitable front sight mount - but it does look good and "chunky" and the adjustable cheek piece is another nice touch!

    I was contemplating reducing the power and adding some suitable sights - maybe it was just as well that I missed it as it may not have enjoyed having its power reduced still further as I understand that the Hatsun Dominator was intended ( and is better suited) to more power - and not less power!

    Nice to see you still entering the MPL with different "kickers" though - have you thought about trying the supported air rifle shooting with a kicker?

    They work surprisingly well - my HW99S was surprisingly good !
    Rossendale Target Shooting Club. Every Tuesday and Thursday evening 7 - 10pm.

  13. #13
    Join Date
    Jul 2015
    Location
    Hastings
    Posts
    1,498
    Hello to All,

    Scores updated Sunday, 20190224.

    I was lucky to recently buy a target rifle you don't often see - a Haenel 312 (recoiling side-lever, sliding chamber) from the GDR days.

    The '312 is very nicely made, easy to cock, has a sweet trigger and shoots beautifully.

    It is quite down on velocity - ca. 430 fps vs a nominal 550 fps, so it has gone off for a fettle.

    I will be using the '312 in the MPL when it gets back.

    Have fun & a good Sunday

    Best regards

    Russ




  14. #14
    Join Date
    Jul 2015
    Location
    Hastings
    Posts
    1,498
    Bob,

    On the Hatsan 55S, it is a relativley straight job to fit a fore-sight tunnel - just mill off the fibre optic top part of the fore-sight, to leave an almost 'made for it' dovetail.

    Strange to have a rifle with a foresight tunnel that cost more than the rifle !

    Have fun & a good Sunday

    Best regards

    Russ





  15. #15
    Join Date
    Mar 2010
    Location
    Rossendale and Formby
    Posts
    5,606
    Quote Originally Posted by PhatMan View Post
    Hello to All,

    Scores updated Sunday, 20190224.

    I was lucky to recently buy a target rifle you don't often see - a Haenel 312 (recoiling side-lever, sliding chamber) from the GDR days.

    The '312 is very nicely made, easy to cock, has a sweet trigger and shoots beautifully.

    It is quite down on velocity - ca. 430 fps vs a nominal 550 fps, so it has gone off for a fettle.

    I will be using the '312 in the MPL when it gets back.

    Have fun & a good Sunday

    Best regards

    Russ



    Now that does look like a serious target rifle - classic lines - very nice!
    Rossendale Target Shooting Club. Every Tuesday and Thursday evening 7 - 10pm.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •