Webley MK VI Tip
This Webley was tending to jam on firing, found the timing was out. As the trigger is pulled, the hand (pawl) A pushes the cylinder clockwise and the cylinder lock B should drop down to allow the movement. I found the tiny lock spring C had come off its locating peg, so as the trigger is pulled there is a slight delay in the lock dropping, causing an obstruction. If you have this problem you can relocate the spring but I think a very slightly stronger one is better. Sorry folks, after experimenting found that a weak spring is better. With strong spring tends to lock up more.
Baz
https://i.imgur.com/TKsS2Iv.jpg
Last edited by Benelli B76; 23-04-2019 at 09:53 AM.
BE AN INDEPENDENT THINKER, DON'T FOLLOW THE CROWD