Perhaps a photograph of the unit and cutting blade itself would help. You can probably get a replacement part, but difficult to say at this stage.
I need some info if possible from L.E.Wilson trimming tool users please.
A friend several years ago made me a trimming tool, composed of a cutter the one end and a hexagonal rod the other from which you could run a small electric screwdriver, it's always worked great until now.
It's not now cutting properly, I assume it's lost it's cutting edge over the years, so I need a new one.
Unfortunately my friend, who was a machinist, died a few years back, so being with no knowledge of machine cutters, now need some help on the type of cutter to get.
There are no model engineering society's in my area or similar to ask, so I'm at a loss.
Can any one help?
Thanks for any/all replies.
Last edited by CROWMAN; 03-07-2019 at 08:00 PM. Reason: Punctuation
6.5 55 SWEDE.223 HOWA VARMINT NIKON 8X32X50 -.22LR CZ STYLE-16" .17 HMR CZ AMERICAN-16" SIMMONS AETEC-12G BERETTA A.302,AYA NO 4,BAIKAL O&U
Perhaps a photograph of the unit and cutting blade itself would help. You can probably get a replacement part, but difficult to say at this stage.
Thank you for your reply.
I could buy a Wilson cutter at over £60-00, so apart from the price! It would mean that I lost the screwdriver facility, plus I would have to buy a "cranking handle" as well, another £25-00 .
If any one with knowledge of the different types of cutters available contacts me, I could forward a photo.
Thank you.
6.5 55 SWEDE.223 HOWA VARMINT NIKON 8X32X50 -.22LR CZ STYLE-16" .17 HMR CZ AMERICAN-16" SIMMONS AETEC-12G BERETTA A.302,AYA NO 4,BAIKAL O&U
have a look on wilsons website
Yes, I know how much a Wilson cutter would be but am hoping I can a source a cutter else where, just need to find out the correct type.
6.5 55 SWEDE.223 HOWA VARMINT NIKON 8X32X50 -.22LR CZ STYLE-16" .17 HMR CZ AMERICAN-16" SIMMONS AETEC-12G BERETTA A.302,AYA NO 4,BAIKAL O&U
Most likely your friend used an end mill cutter, as mentioned previously some pics would help ,have you taken it apart to see how the cutter is kept in place ?
Email me pics of you like (see profile for details )
ATB
James
A picture would certainly help. If it is an end mill cutter it may be reasonably cheap to replace, or even have it sharpened.
To JB101
Many thanks for your reply and your estimate of which cutter.
I've just got back from hols, but will forward a photo etc in the next few days.
And yes, how is the cutter held, I had thought of this as no "recessed" grub/allen bolt etc
I was wondering if it is just opposite threads so it locks the cutter to the holder or possibly "sweated" on?
But I will send photos asap.
Cheers
6.5 55 SWEDE.223 HOWA VARMINT NIKON 8X32X50 -.22LR CZ STYLE-16" .17 HMR CZ AMERICAN-16" SIMMONS AETEC-12G BERETTA A.302,AYA NO 4,BAIKAL O&U
The cutter just sits in the housing and is not held in by anything.
Rick.
CZ 452 .22 Tikka T3 Varmint Stainless .223
Zabala 12 bore.
If it just sits in the housing then what stops the torque of the cutter turning spinning the cutter inside the housing?
Thanks
Last edited by CROWMAN; 09-07-2019 at 05:25 AM. Reason: alter a term
6.5 55 SWEDE.223 HOWA VARMINT NIKON 8X32X50 -.22LR CZ STYLE-16" .17 HMR CZ AMERICAN-16" SIMMONS AETEC-12G BERETTA A.302,AYA NO 4,BAIKAL O&U
Can you clarify,are you asking how the cutter fixes to the cranking handle ?
Rick.
CZ 452 .22 Tikka T3 Varmint Stainless .223
Zabala 12 bore.
Got the pics through, I'll get them hosted & up on here in a few hours when i make it home.
Hi Ray
Just received your emails & replied back.
There does seem to be limited or no information on alternative (replacement ) cutters in the UK ,as wilson ones are £60.00 ($30.00 stateside).
So would be useful to all owners if you do find an equivalent
Regards
James
www.cdsgltd.co.uk LE Wilson
Cutter 35 quid.
Rick
Last edited by polski; 09-07-2019 at 05:33 PM.
CZ 452 .22 Tikka T3 Varmint Stainless .223
Zabala 12 bore.