Pp750 trigger fettle help

[xraiderx]

This is my second pp750
First one in 177 very stiff cocking and trigger
Replacement 1n 22 a lot better but still the second stage of the trigger
Could be lighter
Has anybody fettled their trigger and what did you do
Cheers

[Retracted_Yeti]

This is my second pp750
First one in 177 very stiff cocking and trigger
Replacement 1n 22 a lot better but still the second stage of the trigger
Could be lighter
Has anybody fettled their trigger and what did you do
Cheers

Trigger removed, used an oilstone to flatten any little bumps/imperfections, then polished with Autosol to a mirror finish, threw away the std grub screws and fitted these ….http://www.modelfixings.co.uk/spring_plungers.htm , much much better trigger now, but could still be better!
HTH.

Roy.

[xraiderx]

Trigger removed, used an oilstone to flatten any little bumps/imperfections, then polished with Autosol to a mirror finish, threw away the std grub screws and fitted these ….http://www.modelfixings.co.uk/spring_plungers.htm , much much better trigger now, but could still be better!
HTH.

Roy.

Done the polishing used the fine stones out of my lansky sharpening kit then autosol
The sear that latches onto hammer needed the most attention
Also give the hammer a polish while I was there then give everything a light smear of bumslide
It is better than it was but think it could be better
Will have a look those screws with the ball on
Which size did you order

[Retracted_Yeti]

Done the polishing used the fine stones out of my lansky sharpening kit then autosol
The sear that latches onto hammer needed the most attention
Also give the hammer a polish while I was there then give everything a light smear of bumslide
It is better than it was but think it could be better
Will have a look those screws with the ball on
Which size did you order

IIRC 3mm, they will need shortening a bit mind, I used a junior hacksaw to recut the head for the screwdriver :-)

HTH.

Roy.