personally I would not use Vhit 140 with LEAD,
WHAT OTHER powders you got,
Could anyone suggest a charge of Vit 140 for a lead .303 RNGC of 165 gr .
Many thanks
personally I would not use Vhit 140 with LEAD,
WHAT OTHER powders you got,
Reloader 7 and Blue Dot .
what size is the cast bullet?
r7 is too fast but can be used as a reduced load as in ed harris etc
if your sticking to vit 140 then i would work up around 41gn mark
but you do need to slug your bore
email...... stephenbarrow@ntlworld.com
Bullet is .312 " Is 41 gn of powder a starting point ?
Hopefully I will get my mitts on the rifle at the weekend and slug the bore .
Thanks for the help gents .
email...... stephenbarrow@ntlworld.com
You Cannot Reason People Out of Something They Were Not Reasoned Into
"Politicians like to panic, they need activity. It is their substitute for achievement" Sir Humphry Appleby
email...... stephenbarrow@ntlworld.com
I don't load. 303 but do for 7.62x54 which has a similar case capacity. With a 185gr cast and 36 gr of N140 I get 2034 fps which is maximum velocity for accuracy in my rifle. RL7 is very good, start at 26 gr and work up. What bullet design are you using? Most moulds for. 303 and 7.62 Russian are 180 gr and heavier.
I have used 35gns of N140 with a 185gn gas checked bullet in 303.
Approx 2100fps.
They shoot fine.
Good deals with: Muskett, Dreben, roger.kerry, TALL, Helidave1, Chelseablue, Leeroy7031, Mousemann, pnuk, Practical, NEWFI, HOOGS, Webb22, lazybones1416 and deanw5262 among others. Thanks Guys.
Thanks.
I had an older data sheet/manual with Reloder7 and 174FMJs listed and I cannot find it just now.
My workshop is all packed up as it's being rebuilt, can't wait to unpack the container and get my stuff out again.
But I have a nice load with 174gn SMKs and it shoots lovely with less recoil than the surplus stuff. I think it was 36gn of Reloder7
Good deals with: Muskett, Dreben, roger.kerry, TALL, Helidave1, Chelseablue, Leeroy7031, Mousemann, pnuk, Practical, NEWFI, HOOGS, Webb22, lazybones1416 and deanw5262 among others. Thanks Guys.