should have some Ace trigger blocks at the weekend i'll have to do a test fit to a gun before any would be available and they will need to be anodised if req
should have some Ace trigger blocks at the weekend i'll have to do a test fit to a gun before any would be available and they will need to be anodised if req
Fab, thanks Ped.
PS did you get me email?
Cheers
WANTED: Next weeks winning lottery numbers :-)
i've not seen it but it could be in my others folder
They look a great job as well ped, Well done.. Col.
Nice work Ped. glad you'll be able to get our ace working gain.
Hi Ped,
Payment in the post today and PM sent.
Cheers Rich.
WANTED: Next weeks winning lottery numbers :-)
My Ace trigger block has just broken. Seems it is made from cheese. I cant help wondering why the back of the block bridges over the rear screw instead of using it as a second point of attachment. This would have avoided the failure. There is the space in the wooden stock recess to extend the trigger block by 6mm and adding a second bolt. The forces on the pump arm seem quite a lot for one single M6 screw. In addition the stock only has one screw into this cheesy trigger block. I think the design was originally meant for 2 screws. I am going to try making a longer mech from a piece of scrap brass.
i agree they could've had the rear plug screw incorporated into them and on my pan target build i altered one i'd made to be additionally secured at the rear
i still have some billet ones if you get stuck for one
Thanks Ped, they look good and was going to contact you re availability, but I was kicking my heels today and built one from a bit of scrap brass. I also drilled the rear trigger guard to add a second screw for the stock. Now I can pump holding on to the grip knowing it is well bolted. Not sure how to put the photos on though.