Try Facebook PP700W/SA group if you dont get a solution here.
HTH.
Roy.
The gun was leaking around the regulator when filled to full pressure, which seems to be a common issue with these.
So I took it apart to clean up any surfaces and try to stop the leak.
The problem is, I didnt take any notes of how the bellville washers were stacked
Does anyone on here have any hints?
I'm guessing this varies depending on the power setting of the specific market?
Try Facebook PP700W/SA group if you dont get a solution here.
HTH.
Roy.
If it moves.....shoot it!..If it don't move.....shoot it in case it tries to!!!
Light travels faster than sound....this is why I appear bright until you hear me speak!!!
Don't know the setup you had, but here are a few options from gateway...
http://i.imgur.com/c9DLUt4.png
BE AN INDEPENDENT THINKER, DON'T FOLLOW THE CROWD
Thanks to both of you!
Probably differs on different pressure settings, but all info may be useful.
Here's the stack taken from a sub 6ft/ld PP750, this may help or may not!
http://i.imgur.com/cXOUoj8.jpg
HTH.
Roy.
If it moves.....shoot it!..If it don't move.....shoot it in case it tries to!!!
Light travels faster than sound....this is why I appear bright until you hear me speak!!!
Great! My gun is still in parts, and if I remember correctly, it has 10 washers, not 12.
But great info, and a place to start.
Lesson learned, sometimes it really pays to notice how things are put together..
Thanks!
I've gotten some replies on a facebook forum, which verifies what the last post as a std UK stack.
This is described as a 12fpe stack: ))((()))((