Powder funnel?

[CROWMAN]

I reload for several calibres and manage powder filling case on all except 223.

I've just been looking at sets, but no real need for one, just need a preferably small metal funnel with a inside spout bore less than 5mm, which I make the inside neck of a 223 case to be.

If any one has found such an item? I would be grateful for details.

[DedIdick]

I seem to manage OK with my Lee funnel!

[DaveHol]

I use the Satern funnels as sold by Mark at 1967Spud reloading.

https://www.1967spud.com/shop/reload...satern-funnel/

I use a 6.5 one for reloading my Creedmoor and it fits on top of the case perfectly and the powder flows into the case with no problems and am seriously considering getting one for .223 as I don't find the Lee one sits on top of the case that securely.

Only down side is they're not cheap at £20 each.

[CROWMAN]

I use the Satern funnels as sold by Mark at 1967Spud reloading.

https://www.1967spud.com/shop/reload...satern-funnel/

I use a 6.5 one for reloading my Creedmoor and it fits on top of the case perfectly and the powder flows into the case with no problems and am seriously considering getting one for .223 as I don't find the Lee one sits on top of the case that securely.

Only down side is they're not cheap at £20 each.

Yes, that's what I found with the Lee funnel.
I've seen good write up's on the Satern, like every thing good, it's generally dearer than others.

[Rickee]

I use the Satern funnels as sold by Mark at 1967Spud reloading.

https://www.1967spud.com/shop/reload...satern-funnel/

I use a 6.5 one for reloading my Creedmoor and it fits on top of the case perfectly and the powder flows into the case with no problems and am seriously considering getting one for .223 as I don't find the Lee one sits on top of the case that securely.

Only down side is they're not cheap at £20 each.

I use these funnels, damn good they are too. Being anti-static the powder never sticks and they fit cases perfectly. As you say, not cheap though.
I have them in 6.5 and 223 plus a few others.

[pothunter]

These are quite nifty 3d printed by one of our members.

[DesG]

These are quite nifty 3d printed by one of our members.

If he doesn't I can.

[CROWMAN]

These are quite nifty 3d printed by one of our members.

Comment not required, member has been in touch now.

[kennyc]

I seem to manage OK with my Lee funnel!

Me too, probably not sexy enough

[DesG]

Some people are happy driving Skodas as well.

[baldycoot]

I had saturn funnels for three cals and there is no question they were all good, but very delicate and prone to deforming.

I created a more consistent/better balanced funnel using a well worn old plastic funnel, a sacrificial case and some metal putty.
A little time with the dremmel tool, some acetone (nail polish remover) to smooth the finish, and it fitted better than anything else I've used.

[Charlts]

I treated myself to an Area419 funnel set a few years ago and it's excellent. Bloomin pricey but it's really nice to use.

[aris]

I treated myself to an Area419 funnel set a few years ago and it's excellent. Bloomin pricey but it's really nice to use.

I'll bet it is. Those guys seriously over ngineer stuff. Have you seen their $1200 turret press?

[loiner1965]

Some people are happy driving Skodas as well.

guess who drives a skoda lol

[kennyc]

Some people are happy driving Skodas as well.

its a funnel ! Just stick a fancy sticker on it (like VW )