I best put up a wanted ad, see what I get offered.
A Venom branded scope would be great, I bet they don't come cheap.
You could also try to find one of Venom's own branded scopes. They did a 4 x 32pa, 6 x 40pa, 3-9 x 40pa and of course a 2-7 x 32pa. Best of luck. Mach 1.5
I best put up a wanted ad, see what I get offered.
A Venom branded scope would be great, I bet they don't come cheap.
Also look for the Lisenfeld range of scopes. German glass and Venom stocked these when they were based at the Gun Barrel Works. Mach 1.5
I'm guessing now V-mach is gone, hybrid piston seals aren't going to be available for these.
Maybe get in touch with venoman Dean
http://www.airgunbbs.com/showthread....70#post7983470
Optima 3-9x40 or the best a Zeiss 3-9x36 diavari duplex scope.
Herx
77
Fighter against the "Dark Arts" A stranger in an even stranger land.
GC2+Leupold 14.4-34x45
AA400 fac receiver+sidewinder 8.5-34x52
Weihrauch HW77k fiddled with and doing what it wants to +Zeiss 3-9x36.
Weihrauch HW90k
Weihrauch HW97k learning from above,now sporting a Maccarri 77/97 target stock..+Bushnell 3200.Go on shoot one you know you want to
Daystate mk3 RT Delux + bushnell 4200 8-24x 40Does what it should again & again.
Fwb 124 + Optima was good is good!
Webley Vulcan.
Sorry it's taken me so long, here are some pictures.
I've added the piston and spring from my other 25mm internals 77k in .177, Venom is .22.
https://www.flickr.com/photos/152642.../shares/64Z765
This forum is a pain to add pictures to.
Thanks.
It looks like the venom seal adds a couple of mm of stroke.
Rich.
WANTED: Next weeks winning lottery numbers :-)
I've been spending a bit of time with the Venom, recording dimensions of internals for interested parties and cleaning, relubing, etc. One thing that has come up is the depth of the piston seal, 8mm, I believe this is shallower than later Venom/Vmach seals. Certainly shallower than the OE seal.