Should be a block , spring & a “L “. Shaped plate IIRC .
Thanks for looking.
Can anyone show a photo of trigger/sear parts laid out please. Picked a wreck up and missing bolt/catch/spring etc but no idea about the rest.
Trigger blade is present and the plate above it
Should be a block , spring & a “L “. Shaped plate IIRC .
Founder & ex secretary of Rivington Riflemen.
www.rivington-riflemen.uk
Thanks both. Really need a real parts photo tho'.
Custom BSA S10 .22 PAX Phoenix Mk 2 .22 Custom Titan Manitou .22 (JB BP) HW77 .22 FWB Sport Mk1 .22 Sharp Ace .22 Crossman 600 .22 Berretta 92 .20 Desert Eagle .177
early ones had a big square block but later ones used the L plate found on Aces
Jules, I've messaged you some pics on the "other one"
Rob
B.A.S.C. member
Hope this helps.
Cheers, Louis
A quick, pleasing for me, update. The sear and plate were absolutely jammed in the receiver having swollen due to rust build up. On and up now.
The same thing happened with my mk1, after 40 years the grease had cemented itself in there. It took some effort prying it out without damaging the breech. It must make a difference to the trigger pull?