It seems for an 11mm rail I would require these sized pins. Confirmation would be helpful.
Another lovely scope I think also made by Hakko? You don't see them come up for sale as much probably because even after several decades they are still crystal clear.
The SS1 doesn't have an adjustable objective like the Optima, but it still seems to focus down to 5 yards.
Last edited by ratbuster2240; 21-04-2021 at 05:50 PM.
It seems for an 11mm rail I would require these sized pins. Confirmation would be helpful.
Lovely job nice looking gun enjoy
I have fitted a pair of spacer pins to the SS1 which solves the canting issues on 11mm rails.
I then tried it on the 342 with the Mac1 scope mount and it works great. I can still pump it up with my hand in the correct place and without holding onto the scope, it's tight but there's just enough room.
I had a great day at Kempton Park Arms Fair on Sunday and I picked up a Benjamin 392G made in 1991. Cosmetically it's in great condition but it hadn't been used for a long time. It had a stuck powerlet and the seals were in bad shape.
I'm a big fan of these Racine made guns and one in .22 should make good power when it's up and running.
The Benjamin doesn't look like it's been opened up before but it was common for the powerlet to get stuck and the inlet seal to be damaged. I think this one may have had this happen early on in it's life and just left with it stuck.
The Daisy powerlet was well and truly stuck and the seal disintegrated.
Last edited by ratbuster2240; 04-05-2021 at 12:04 AM.
Nice buy ratbuster.
Quite rare with the black finish, they are usually nickel.
Previous threads pics show some lovely examples, interesting mount
Custom BSA S10 .22 PAX Phoenix Mk 2 .22 Custom Titan Manitou .22 (JB BP) HW77 .22 FWB Sport Mk1 .22 Sharp Ace .22 Crossman 600 .22 Berretta 92 .20 Desert Eagle .177
Custom BSA S10 .22 PAX Phoenix Mk 2 .22 Custom Titan Manitou .22 (JB BP) HW77 .22 FWB Sport Mk1 .22 Sharp Ace .22 Crossman 600 .22 Berretta 92 .20 Desert Eagle .177
nice find James