Have you tried shell house bullets to see if they can help
This is a hard to find caliber cast bullet in .406 260 grain for my Marlin 1881 40-60Marlin rifle.
I do know it is the same as 40-65wcf (NO typo) but having trouble to find a mold to cast my own.
It is sold out everywhere ..
As I do have the proper die set for it and the brass I can use too, I am missing the thing that makes the whole in the target. :-)
My question is: anyone out there has a mold they like to sell or would like to cast some bullets for me?
===============
Frank
Have you tried shell house bullets to see if they can help
email...... stephenbarrow@ntlworld.com
Thanks ! Will try them then.
===============
Frank
Frank
BACo will do you a mold in any desired diameter and design, here’s a link to some examples: https://www.buffaloarms.com/407-210-...jim407210.html
If you had a 40-65 (400 bore, 408 groove) then I could help you out with a few but the molds I have drop .409 diameter bullets when using 20:1 or Lyman #2
Not sure sizing down to your needs will work?
Brgds Terry
Thanks Terry,
Getting molds from the US is a big problem atm as allmost everything is sold out!
When you do find something, AND the seller is willing to ship abroad, they charge 50 to 60 usd for a mold to be send!
When it arrives at my customs they charge me the extra import duty aswell!
So a total of about 300usd for a mold?
That is why I tried here first, maybe I come back on your kind offer when I have no luck elswhere.
best regards
Frank
email...... stephenbarrow@ntlworld.com
Hi.
This post has got my grey matter working, Is there any reference data available for bullet heads. If I wanted to make a mould where can I look up the required specifications. Saami does not help unless I missed something. I understand fine tuning of a mould would be required for weight but I would need something for reference without sourcing a sample.
all the best.
James
Hello James,
Depends what you are looking for in a mold? There are a shed load of designs out there, have a cruise thru' the BACo mold pages for examples.
Here are some other suppliers fyi:
https://www.brooksmoulds.com/
https://www.accuratemolds.com/
https://noebulletmolds.com/site/
or you can splash out and buy software to do it yourself: http://www.tmtpages.com/
You 'are' going down a rabbit hole here BTW, casting a goof bullet can be addictive