Page 17 of 33 FirstFirst ... 7151617181927 ... LastLast
Results 241 to 255 of 489

Thread: Benjamin 397P Phase 1

  1. #241
    Join Date
    Dec 2016
    Location
    leeds
    Posts
    2,099
    it is James i know i have one somewhere safe for it

  2. #242
    Join Date
    Feb 2009
    Location
    Oxford
    Posts
    1,664


    Had a good plink with the new Innova today after fitting a standard pump handle, then rubbed down with fine wire wool.
    I also retro fitted a mk2 safety, it is very basic but I like it. I cleaned the grease out of the cylinder and lubricated the pivot points with secret sauce.

    I need to adjust the pump rod to make the handle close a bit firmer and it felt a bit weak on 4 pumps.
    Last edited by ratbuster2240; 11-07-2021 at 05:35 PM.

  3. #243
    Join Date
    Dec 2016
    Location
    leeds
    Posts
    2,099
    looks well as do the s200's

  4. #244
    Join Date
    Feb 2009
    Location
    Oxford
    Posts
    1,664
    Thanks Ped the S200s feel so nice to shoot, they're my friends he has half a dozen for cadets or scouts. They have the 10 shot conversion which was a bit clunky to operate.

    Quote Originally Posted by --ped-- View Post
    looks well as do the s200's

  5. #245
    Join Date
    Dec 2016
    Location
    leeds
    Posts
    2,099
    my s2oo is still a work in progress it was .22 and i bought a .177 barrel for it which turned out to be a .22 so i machined a .20 blank to fit
    still need to get iit set up and sort out getting the barrel blued

  6. #246
    Join Date
    Feb 2009
    Location
    Oxford
    Posts
    1,664
    I can see why the S200 was so popular now, it's a good all rounder. Were they all made by CZ?

    I once bought a 6ft-lb .177 Stealth for 10m fun and when it turned up it was in .22. Unless it was for Germany, it was not much good for anything.

    Quote Originally Posted by --ped-- View Post
    my s2oo is still a work in progress it was .22 and i bought a .177 barrel for it which turned out to be a .22 so i machined a .20 blank to fit
    still need to get iit set up and sort out getting the barrel blued

  7. #247
    Join Date
    Jul 2008
    Location
    Hollesley, near Woodbridge
    Posts
    2,957
    The Innova looks great with that silencer fitted, very business like
    Custom BSA S10 .22 PAX Phoenix Mk 2 .22 Custom Titan Manitou .22 (JB BP) HW77 .22 FWB Sport Mk1 .22 Sharp Ace .22 Crossman 600 .22 Berretta 92 .20 Desert Eagle .177

  8. #248
    Join Date
    Feb 2009
    Location
    Oxford
    Posts
    1,664
    Thanks MartynB, it's the Hugget Belitta Atom, it's the smallest silencer I've found and keeps the rifle short. The size does let it down, it dampens the muzzle crack, but it's far from quiet.


    Quote Originally Posted by MartynB View Post
    The Innova looks great with that silencer fitted, very business like
    Last edited by ratbuster2240; 12-07-2021 at 07:00 PM.

  9. #249
    Join Date
    Jul 2008
    Location
    Hollesley, near Woodbridge
    Posts
    2,957
    Quote Originally Posted by ratbuster2240 View Post
    Thanks MartynB, it's the Hugget Belitta Atom, it's the smallest silencer I've found and keeps the rifle short. The size does let it down, it dampens the muzzle crack, but it's far from quiet.
    If I'm honest, any silencer is a bonus as without one it has a hell of a crack
    Custom BSA S10 .22 PAX Phoenix Mk 2 .22 Custom Titan Manitou .22 (JB BP) HW77 .22 FWB Sport Mk1 .22 Sharp Ace .22 Crossman 600 .22 Berretta 92 .20 Desert Eagle .177

  10. #250
    Join Date
    Feb 2009
    Location
    Oxford
    Posts
    1,664
    Yes the Innova certainly does, it must be the short barrel.

    Quote Originally Posted by MartynB View Post
    If I'm honest, any silencer is a bonus as without one it has a hell of a crack

  11. #251
    Join Date
    Feb 2009
    Location
    Oxford
    Posts
    1,664
    I've stripped the Innova down to see what surprises are inside and to try and get the alloy breech on. It has what looks to be a Trobb replacement piston head to take an Oring.

  12. #252
    Join Date
    Feb 2009
    Location
    Oxford
    Posts
    1,664


    I'm going to re blue the pump tube and I think I might do the barrel too and leave off the plastic shroud.



    I'm having trouble re fitting the trigger, I've got the L sear to replace the old block and used the old spring. The new alloy block only accepts the L shaped sear.

    The problem is when I fit the short screw and put the trigger spring on top there's then no room for the trigger. I've tried without the securing screw and everything just feels sloppy.


  13. #253
    Join Date
    Dec 2016
    Location
    leeds
    Posts
    2,099
    i'll have a look what i did with mine but i feel sure i made another retainer in brass

  14. #254
    Join Date
    Feb 2009
    Location
    Oxford
    Posts
    1,664
    Thank you Ped, something is not right here. There's a 2nd shorter M6 grub screw that goes through before the trigger spring, but it's still too long.






    Quote Originally Posted by --ped-- View Post
    i'll have a look what i did with mine but i feel sure i made another retainer in brass

  15. #255
    Join Date
    Dec 2016
    Location
    leeds
    Posts
    2,099
    the later batches have been altered from the original ones Mike brought in a few years back as we did a few mods to them
    i'd try a shorter grub screw to allow for more spring or use a shorter spring
    i know Steve who got this batch of parts has got some more in and has built one on that model of breech i'll message him later to see what his work round was

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •