Page 1 of 3 123 LastLast
Results 1 to 15 of 44

Thread: rapid 7 22 never fails

  1. #1
    Join Date
    Feb 2012
    Location
    gateshead
    Posts
    26,067

    rapid 7 22 never fails

    not had the rapid out for a while had a hour up the golf course with it these guns are honestly one of the best guns ive used,had this one many years now thought about selling it a few times but kept hold of it

  2. #2
    Join Date
    Apr 2002
    Location
    Near Wimbledon, SW London, or Lusaka, Zambia
    Posts
    27,019
    yup, they are classic.... hardly ever go wrong, and when they do simple to fix.
    Always looking for any cheap, interesting, knackered "project" guns. Thanks, JB.

  3. #3
    Join Date
    May 2016
    Location
    BOLTON
    Posts
    831
    Still the best tool in the box for vermin work.

    Dave.

  4. #4
    Join Date
    Mar 2010
    Location
    mountain ash
    Posts
    8,902
    My mk1 had been standing for near 20 years , Accuracy was about ok, The hammer and bits etc had some kind of lube all over it, Cleaned it all off and after about 4 or 5 mags the accuracy became better and better , Think it just needed running in again,

  5. #5
    Join Date
    Feb 2012
    Location
    gateshead
    Posts
    26,067
    that is good going carlos

  6. #6
    Join Date
    Mar 2010
    Location
    mountain ash
    Posts
    8,902
    Quote Originally Posted by rapidresponse1 View Post
    that is good going carlos
    Yes some old bloke bought it in 1995 , He was in his 80s when I bought it off him, Looked like the pellets I had with it had been stored in the sea, He bought the gun around retirement age but hardly used it, I shot a couple of mags but something wasnt right , I normally put paper up at different distances but I was having to adjust the scopes every couple of shots, Not much but did not seem to hold, The hammer, weight and spring seemed to have a coating on them and felt tacky, Cleaned them off and after that the more I shot it the better it got and seemed to hold as expected, Just think it needed a bedding back in,

  7. #7
    Join Date
    Feb 2020
    Location
    Todmorden
    Posts
    580
    rapids are real tack drivers may be a service and be back to factory standards

  8. #8
    Join Date
    Feb 2012
    Location
    gateshead
    Posts
    26,067
    yes lovely guns

  9. #9
    Join Date
    Aug 2003
    Location
    Coventry
    Posts
    638
    MFR…….why oh why do we sell these things only to wish we still had them a few years (well 12) down the line

  10. #10
    Join Date
    Mar 2008
    Location
    Long Eaton, (Derby/Notts)
    Posts
    6,288
    Quote Originally Posted by Drew 3 View Post
    MFR…….why oh why do we sell these things only to wish we still had them a few years (well 12) down the line
    Know the feeling bud,

    I’ve owned so many rapids in all guises over the many years.

    However the MFR will always be my favourite

    Some might say more modern pcp’s with fancy twin reg setups, quick fills and gauges are the way forward but you just can’t disagree with an older pcp that’s built like a tank and so easy to maintain with far less to go wrong.

    With a MFR it’s seconds to recharge anyway with no bottle burping and simplicity itself.

    However a gauge certainly would be handy though as I have ironically been let down in the field once before with a leaking rapid but it was a simple fix anyway.

  11. #11
    Join Date
    Feb 2012
    Location
    gateshead
    Posts
    26,067
    i thought long and hard as my rapid was totaly original mk1,but then i got the gauge and quick fill fitted makes life much easier now with the rapid

  12. #12
    Join Date
    Apr 2002
    Location
    Near Wimbledon, SW London, or Lusaka, Zambia
    Posts
    27,019
    Quote Originally Posted by rapidresponse1 View Post
    i thought long and hard as my rapid was totaly original mk1,but then i got the gauge and quick fill fitted makes life much easier now with the rapid
    ditto.. addresses about the only "downside" of the rapid, although it is a pain having to empty the bottle when servicing. One of mine has the old Theoben guage system (repalcement for the bottle adapter), which means you keep the valve in the bottle.
    Always looking for any cheap, interesting, knackered "project" guns. Thanks, JB.

  13. #13
    Join Date
    Jul 2005
    Location
    Operating without any decent restraint - Nottm
    Posts
    23,408
    I bought one back in 2006 and I couldn't wait to get rid of it. I had just bought an HW100 and the Rapid was agricultural in every way compared to it.

    1st Battalion Humberside Cavalier Rescue Deserters on the cut

  14. #14
    Join Date
    Feb 2012
    Location
    gateshead
    Posts
    26,067
    yes the 100 is a nice gun as well

  15. #15
    Join Date
    Apr 2006
    Location
    nottingham
    Posts
    3,648
    Quote Originally Posted by rapidresponse1 View Post
    not had the rapid out for a while had a hour up the golf course with it these guns are honestly one of the best guns ive used,had this one many years now thought about selling it a few times but kept hold of it
    Yes they are lots of better gun's now but for reliability and simplicity to work on not much to go wrong and for the nostalgia if your in your late 50s like me everyone wanted one back in the day lol

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •