Page 1 of 2 12 LastLast
Results 1 to 15 of 19

Thread: Pardini owners

  1. #1
    Join Date
    Mar 2005
    Location
    ards
    Posts
    1,558

    Pardini owners

    Anybody own both a K12 and a K58 ?
    Im just wondering how the triggers compare.

  2. #2
    Join Date
    Mar 2010
    Location
    Rossendale and Formby
    Posts
    5,606
    IMHO the Pardini K12 and Pardini K12 Junior have got the best engineered and the best "feeling" trigger of any of the match air pistols that have mechanical triggers.

    I do not remember too much about the K58 as I didnt keep it that long, but my Pardini P10 SSP has been with me a long time, and that has got a fairly good trigger - maybe not so different to the K58.
    Last edited by zooma; 07-08-2024 at 07:53 PM.
    Rossendale Target Shooting Club. Every Tuesday and Thursday evening 7 - 10pm.

  3. #3
    Join Date
    Mar 2005
    Location
    ards
    Posts
    1,558
    Thanks, i have been shooting a Steyr LP10 for a long time and have always been quite happy with it.
    The standard Steyr grip doesn't work for me and i play around with that from time to time, i always felt the grip was holding me back a little but i just started shooting a K58 and im shooting better with it than my Steyr, now im thinking its the trigger making the difference.
    My K58 has a Rink grip which fits well but has a 7° offset that doesn't suit me but even with that im shooting it better than the LP10.
    I have a new Pardini rimfire and the trigger is hands down the best trigger i have ever used, its very similar to the K58 so i was hoping the K12 has a similar feel to it.
    I don't really want to change guns so i will play around with the Steyr trigger for a while but if and when the time comes i think a K12 will be the way to go.

  4. #4
    Join Date
    Sep 2013
    Location
    Norwich
    Posts
    387
    Having shot the P10 And K58 and my main competition pistol is the K12, here is what I think but it is only words and cannot properly describe the feeling, also I've worked on the P10, K58 and K12 so all the triggers have been adjusted to my preference.
    P10 trigger just a little mushy but a smooth release, trigger mech old fashioned, K58 trigger better and the start of the cascade lever mechanism, trigger blade not changeable or movable, release sharp and a reasonable two stage setup can be achieved. K12 superb highly customisable trigger setup it will perform as you want it, super release with lightness and no mechanical clunking, when you remove the grip it is completely clear to anyone how the system works so this allows you to tune it to perfection for whatever suits you. Be aware temperature changes mechanical triggers and today I had to re adjust the sear on mine just before a competition and recheck the lift weight as suddenly the sear would not engage, and yes I do have my sears fine. Try a K12 and see if it talks to you.

  5. #5
    Join Date
    Mar 2005
    Location
    ards
    Posts
    1,558
    Thank you, i think there are two versions of the K58's, i believe mine is a more recent version, there is adjustment of the trigger blade, it is a similar / same design as the modern Pardini rimfire trigger blade.


  6. #6
    Join Date
    Sep 2013
    Location
    Norwich
    Posts
    387
    You are correct, interesting to see it is the same as the K12, it is a cunning trigger blade and I like it a lot as it allows you to place your finger where you like without trying to constrain it. The same reason why I like the Putter trigger.
    The next change they made was to get rid of the lever for compressing and just put a PCP cylinder on the thing, if you have the instruction book you may find it shows this version. If only there was better tech cover here we would see more K12's on the firing line at competitions.

  7. #7
    Join Date
    Jan 2018
    Location
    Glasgow
    Posts
    925
    Quote Originally Posted by rapidboy1 View Post
    Thank you, i think there are two versions of the K58's, i believe mine is a more recent version, there is adjustment of the trigger blade, it is a similar / same design as the modern Pardini rimfire trigger blade.

    Any chance you could show a photo of the K58 without the grip on? I am curious as to whether a Rink grip for the K58 could be modified to fit a P10, which Rink do not make a grip for.

  8. #8
    Join Date
    Mar 2005
    Location
    ards
    Posts
    1,558
    I spoke with Thomas last week, my grip is an older model, it will fit only the K10 and K58, the latest version will fit more models.
    I ordered a replacement grip and apparently it will fit my K58 and also K12, K10, K2, K2s, K60

    My original Rink grip is made from two pieces of wood so it looks like the rout was made and then joined together.



    Hope these help, if you need anything else just ask







    Last edited by rapidboy1; 18-10-2023 at 10:12 PM.

  9. #9
    Join Date
    Jan 2018
    Location
    Glasgow
    Posts
    925
    Thanks very much, I appreciate you posting these!

  10. #10
    Join Date
    Mar 2005
    Location
    ards
    Posts
    1,558
    So i finally managed to get a K12 and first impressions are that it was worth the wait.
    The standard grip is nicer looking than my Rink and actually not a bad fit at all but i had the Rink set up for me on my K58 so i swapped it over.
    The trigger is everything i hoped it would be and more, my old Steyr always felt a little "vague", the K12 is more positive and gives me more feedback.
    The adjustment is great, its all very intuitive to set up and a really nice touch is the trigger post has three positions so you have a stack of adjustment fore and aft.
    Anyway im posting a few photographs simply because there isn't a lot of info about these online.






  11. #11
    Join Date
    Sep 2010
    Location
    manchester
    Posts
    663
    Quote Originally Posted by rapidboy1 View Post
    So i finally managed to get a K12 and first impressions are that it was worth the wait.
    The standard grip is nicer looking than my Rink and actually not a bad fit at all but i had the Rink set up for me on my K58 so i swapped it over.
    The trigger is everything i hoped it would be and more, my old Steyr always felt a little "vague", the K12 is more positive and gives me more feedback.
    The adjustment is great, its all very intuitive to set up and a really nice touch is the trigger post has three positions so you have a stack of adjustment fore and aft.
    Anyway im posting a few photographs simply because there isn't a lot of info about these online.





    Lovely looking,I understand its a bigger gun than an LP10 Steyr,2.5 ounces heavier , and the grip is non adjustable but when I picked one up it pointed well

  12. #12
    Join Date
    Mar 2005
    Location
    ards
    Posts
    1,558
    It's the full size version, 415mm OAL and weighs in at 1040g, bit longer and heavier than the LP10 but they also do a short version which i think is 35mm shorter and 130g lighter.
    I had added a lot of extra weight to my LP10, im finding the K12 is less "twitchy" so at the minute im not feeling the need to add extra weight, i think it's just that the K12 fits me better, my trigger finger falls very naturally into position, with the Steyr i was always having to "reach" for the trigger which caused twitching, i then tried to dampen that movement by adding weights.
    You can add up to 10 weights to the K12 shroud, (it comes with 4 x 5g weights) , or you can remove the shroud to reduce weight, (shroud is 40g) so quite a lot of weight adjustment if required.
    The grip is fixed and that was one of my concerns but so far it points very naturally for me with both the factory grip and the Rink, i had looked at a few Walther LP500, they are very adjustable which was one thing i liked about them.

  13. #13
    Join Date
    Sep 2010
    Location
    manchester
    Posts
    663
    The agency office is in ..Edinburgh,but they seem to operate from........Inverness!!!!!!!!!!!!!!!!!!!!!!
    I would have a dabble but they rarely come to the market used. They seem much cheaper than Steyr ,and getting one serviced,at least Steyr is only in York

  14. #14
    Join Date
    Mar 2005
    Location
    ards
    Posts
    1,558
    Around £1600 new, includes hard case and two cylinders.

    Steyr is a very safe bet, probably the easiest pistol to live with in terms of servicing and resale but i was never able to make my LP10 fit and i wasn't particularly impressed with Steyr customer support over the years.

    A Walther would have been easiest for me, i know a Walther main dealer and before ordering the Pardini I spent a day playing with everything he had in stock but i didn't warm to them.

    Both the Pardini UK importer and the factory have been very good to deal with, the service has been above and beyond.

  15. #15
    Join Date
    Sep 2010
    Location
    manchester
    Posts
    663
    Since Harry Preston appears to have "stepped down" they seem to be very low profile. Not at Blackburn or Aldersley
    or replying to emails...

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •