Technically maybe not an Airgun but just an Airgun part, Joffy mentioned to me the other day parts for a Slingshot rifle and I've been pondering on how to make it ever since, I know I don't want to make it Fowler style as it'll be difficult for me to cock and load so ideally I want to maybe have something like a pump action or lever on a one piece stock, are there printable patterns for them out there that I can look at and maybe adapt from a conventional rifle or Air Rifle into a Slingshot rifle?
Blanks seemed a little pricey for what I can afford when I had a brief look so I'll be more than likely needing to shape it myself, figured out the sling part in my head as thats the easy bit, just get a premade set of forks or adapt an existing Catty frame to bolt on the front of the stock which will be as far forward as possible as ideally this thing should be more capable than what a hand drawn one should achieve.
You'll Shoot your eye out Kid
Currently looking for an SMK/BAM B4-4 Rear sight or help modifying current one.
Wanted Daisy Model 25 or Norica Commando in reasonable condition.
Strange how my avatars and settings keep getting either deleted or messed around with
I can't 3D print sadly, was thinking more a paper pattern to draw out onto wood that I could shape by hand, I did watch one made with scrap metal and engine parts that looked pretty cool but I'm not able to weld and probably would burn the house down if I tried in lol.
You'll Shoot your eye out Kid
Currently looking for an SMK/BAM B4-4 Rear sight or help modifying current one.
Wanted Daisy Model 25 or Norica Commando in reasonable condition.
The 3d picture was just something to aim for
Strange how my avatars and settings keep getting either deleted or messed around with
Strange how my avatars and settings keep getting either deleted or messed around with
I did watch that one, forks wont be a problem as we can buy something premade for the job, other thing I'm figuring out is how I can make the reloading easier and potentially able to provide a bigger punch than what my normal hand draw could.
Worst comes to worst the Original 25s stock is still off, I can trace its outline and scale up where it's needed to be longer or beefier, maybe inlaying some steel plate for bracing.
I reckon we could make quite a cannon if we can get it to work.
You'll Shoot your eye out Kid
Currently looking for an SMK/BAM B4-4 Rear sight or help modifying current one.
Wanted Daisy Model 25 or Norica Commando in reasonable condition.
Cheers, the mech should fit into a traditional sized stock which a can through bolt and add a plate for strength, just thinking how I can make something to do the draw and lock it into the mech, possibly with a Magazine to load a BB into the sling as its pulled back.
You'll Shoot your eye out Kid
Currently looking for an SMK/BAM B4-4 Rear sight or help modifying current one.
Wanted Daisy Model 25 or Norica Commando in reasonable condition.
I'm sort of getting an idea how it could work in my head, main workings of the recocking mech will be overtop to avoid fouling on the jaws as they lock closed and possibly trigger the mag as it passes and can be operated with a grip underneath to make operation less strenious.
I'm still full of cold and this Gum infection but I'll get some rough design sketches done to plan things out.
You'll Shoot your eye out Kid
Currently looking for an SMK/BAM B4-4 Rear sight or help modifying current one.
Wanted Daisy Model 25 or Norica Commando in reasonable condition.
just find any old cheap stock on the bay.. you are only going to chop it around anyways..
Always looking for any cheap, interesting, knackered "project" guns. Thanks, JB.
Bay doesn't allow parts on the UK page and won't let you order with a UK account but yes a Used stock could be an option.
You'll Shoot your eye out Kid
Currently looking for an SMK/BAM B4-4 Rear sight or help modifying current one.
Wanted Daisy Model 25 or Norica Commando in reasonable condition.