Results 1 to 9 of 9

Thread: Slip on moderator for a 13.5 - 14.5mm barrel

  1. #1
    Join Date
    Apr 2002
    Location
    Near Wimbledon, SW London, or Lusaka, Zambia
    Posts
    26,987

    Slip on moderator for a 13.5 - 14.5mm barrel

    looking for the above please folks.. anyone aware of anything not too large, heavy or bulky ? Something in the 13.5 - 14.5 range will do, as I can open it out a bit.

    Anyone got any links / models I should look for ?

    Don't want an adapter..
    Always looking for any cheap, interesting, knackered "project" guns. Thanks, JB.

  2. #2
    Join Date
    Aug 2016
    Location
    Melton Mowbray
    Posts
    2,314
    There is a universal fit that I used on my QB78.
    Has two plastic rings that clamp down when tightened.
    The was a pre owned one in Leicester airguns for £20.
    I could pick it up tomorrow and post it on to
    you.
    There are Ok. Work better with some felt added.
    I think sheffield air rifles stock them.
    Repariere nicht, was nicht kaputtist.

  3. #3
    Join Date
    Sep 2010
    Location
    Exeter
    Posts
    36,779
    Weihrauch do a couple of different slip on mods, not sure what barrel sizes off hand.

  4. #4
    Join Date
    Apr 2002
    Location
    Near Wimbledon, SW London, or Lusaka, Zambia
    Posts
    26,987
    Quote Originally Posted by Neil54 View Post
    There is a universal fit that I used on my QB78.
    Has two plastic rings that clamp down when tightened.
    The was a pre owned one in Leicester airguns for £20.
    I could pick it up tomorrow and post it on to
    you.
    There are Ok. Work better with some felt added.
    I think sheffield air rifles stock them.
    Thanks Neil... That sounds like the old webley pro-system.. they would work fine, but unfortunately are too heavy being steel.

    Do you lnow if the one in question is steel or alloy please Neil ? If alloy, I'd defo like it please...

    Thanks,
    JB
    Always looking for any cheap, interesting, knackered "project" guns. Thanks, JB.

  5. #5
    Join Date
    Aug 2016
    Location
    Melton Mowbray
    Posts
    2,314
    It's steel Jon.
    Yes they are a little heavy compared to alloy ones.
    Repariere nicht, was nicht kaputtist.

  6. #6
    Join Date
    Apr 2002
    Location
    Near Wimbledon, SW London, or Lusaka, Zambia
    Posts
    26,987
    Quote Originally Posted by Neil54 View Post
    It's steel Jon.
    Yes they are a little heavy compared to alloy ones.
    Ahh shame, thanks for the information and the idea though...
    Always looking for any cheap, interesting, knackered "project" guns. Thanks, JB.

  7. #7
    Join Date
    Jun 2001
    Location
    Dunstable soon to be Sandy (the place not my name
    Posts
    11,021
    Strange how my avatars and settings keep getting either deleted or messed around with

  8. #8
    Join Date
    Apr 2002
    Location
    Near Wimbledon, SW London, or Lusaka, Zambia
    Posts
    26,987
    Thanks... now one of them world be perfect... expect I see the VCR act applies to moderators ? Having not purchased a new one for several decades.. eash ! How is this making the world safer ?
    Always looking for any cheap, interesting, knackered "project" guns. Thanks, JB.

  9. #9
    Join Date
    Jun 2001
    Location
    Dunstable soon to be Sandy (the place not my name
    Posts
    11,021
    Quote Originally Posted by Shed tuner View Post
    Thanks... now one of them world be perfect... expect I see the VCR act applies to moderators ? Having not purchased a new one for several decades.. eash ! How is this making the world safer ?
    Anyone in the area that can help you out ?
    Strange how my avatars and settings keep getting either deleted or messed around with

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •