Results 1 to 10 of 10

Thread: .177 sub 12fp slugs / barrel combinations

  1. #1
    Join Date
    Apr 2002
    Location
    Near Wimbledon, SW London, or Lusaka, Zambia
    Posts
    26,987

    .177 sub 12fp slugs / barrel combinations

    What barrels have you found work with slugs in sub 12 .177 ?

    I've found a couple that were OK in an unchocked barrel, but still a bit less accurate that their preferred diabolo pellets diet, so no beneift unless perhaps shooting in a hurricane.

    Tried the Zans and some others all around 10g... nothing seems to want to group tighter than an inch at 30 yards
    Always looking for any cheap, interesting, knackered "project" guns. Thanks, JB.

  2. #2
    Join Date
    Jun 2008
    Location
    NR Doncaster
    Posts
    3,304
    .177 10gn Zan.
    Hatsan AT44...So good, it's the dedicated Zan gun.
    BSA R10 Se. ..Suprisingly, good enough for HFT.
    "Democracy is two wolves and a lamb voting on what to have for lunch. Liberty is a well-armed lamb contesting the vote!" -- Benjamin Franklin

  3. #3
    Join Date
    Apr 2002
    Location
    Near Wimbledon, SW London, or Lusaka, Zambia
    Posts
    26,987
    Quote Originally Posted by MrGreengrass View Post
    .177 10gn Zan.
    Hatsan AT44...So good, it's the dedicated Zan gun.
    BSA R10 Se. ..Suprisingly, good enough for HFT.
    That's good to know, thanks... Not sure I've tried the Zans thru my Kral yet, so that's a possibility...
    Always looking for any cheap, interesting, knackered "project" guns. Thanks, JB.

  4. #4
    Join Date
    Jan 2013
    Location
    Barnsley
    Posts
    2,519
    Quote Originally Posted by Shed tuner View Post
    That's good to know, thanks... Not sure I've tried the Zans thru my Kral yet, so that's a possibility...
    I'm getting excellent results with my vulcan 2 and krait bit I've plosihed the choke out of both cz barrels. That being said, it's also improved the groups with diabolo pellets and they still marginally trump the slugs. In truth, they'll both now shoot zan and jsb slugs, jsb pellets, barracuda match, qys streamlined and domed and barracuda match all under a 20p at 40yds. But the best 2 are jsb heavies and the streamlined. with the extra cost of slugs with slightly worse accuracy, I can't justify buying them. I've hunted rats and squirrels with slugs and they were damn good, though.

  5. #5
    Join Date
    Sep 2010
    Location
    Exeter
    Posts
    36,779
    Have you tried the Zan lead free slugs ?

    I didn't even know they existed until I saw some in the dealer last week,
    .177 - 8.5gn, .22 - 15gn, .25 - 22gn, nice weights for sub 12.

  6. #6
    Join Date
    Mar 2012
    Location
    Shirland
    Posts
    512
    Have you tried the Mako slugs? Some have good success with them, but they need to be hand loaded to ensure they enter the barrel straight. Many lightweight slugs suffer from the same problem in that they have a very short length in contact with the barrel and can be slightly crooked when pushed into the barrel, especially from a magazine.
    Slug size relative to your barrel diameter is also critical, you may need to slug your barrel to find out its exact diameter. The slug diameter should ideally be around .001-.002 larger than the diameter between the lands according to US forums.

  7. #7
    Join Date
    Jun 2008
    Location
    NR Doncaster
    Posts
    3,304
    I had the Hatsan AT44 on Zan's in a shootout against my
    FTP900 and HFT 500 at FT distance.
    The comp guns did a little fingernail group at 55yds, the Hatsan did a thumbnail and from the impact noise, hit a whole lot harder.
    II was very surprised how well the BSA R10 shot them.
    "Democracy is two wolves and a lamb voting on what to have for lunch. Liberty is a well-armed lamb contesting the vote!" -- Benjamin Franklin

  8. #8
    Join Date
    Apr 2002
    Location
    Near Wimbledon, SW London, or Lusaka, Zambia
    Posts
    26,987
    Quote Originally Posted by ballisticboy View Post
    Have you tried the Mako slugs? Some have good success with them, but they need to be hand loaded to ensure they enter the barrel straight. Many lightweight slugs suffer from the same problem in that they have a very short length in contact with the barrel and can be slightly crooked when pushed into the barrel, especially from a magazine.
    Slug size relative to your barrel diameter is also critical, you may need to slug your barrel to find out its exact diameter. The slug diameter should ideally be around .001-.002 larger than the diameter between the lands according to US forums.
    yes, tried the Mako's too... not bad, but not as good as lead diabolos
    I apprecaite the criticality of barrel size matching, hence starting this thread.. I can machine a barrel from something to fit one of my rifles.. just need to find a likely donor
    Always looking for any cheap, interesting, knackered "project" guns. Thanks, JB.

  9. #9
    Join Date
    Sep 2012
    Location
    Chelmsford
    Posts
    2,176
    Ive tried five different barrels, choked and unchoked along with a big selection of slugs shot at various fps too but never found one that delivered anything near useable accuracy

    A mate has just tried a few light jsb .177 slugs through his r10 with a chokeless Cometa barrel and says its worth investigating, so he has ordered a box of samples and will test soon
    bigtoe, Harry, hydroclamp, jpsnorton, gayle89, mark410, Stu83, smallholder1, wellhouse0, readingcop, sir-slots-alot, danco1987, Stevenb, DarylDiane, simpleSimon, Ratinator, Milek, Josh, Maxtich, Woodsie99, Ozzie, master_shriller, niloc, Drake267, deejayuu, shootingstars

  10. #10
    Born Again is offline Owns three Roy orbison albums
    Join Date
    Jun 2020
    Location
    Cardigan
    Posts
    1,598
    My Phoenix MK2 with BSA barrel shoots Piledriver slugs very well, but they're way too heavy to be any practical use. It was designed to shoot them, the loading probe locates in the base of the slug to load it straight.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •