Venom Mk1 TX200

[Shed tuner]

Interesting, any chance of a photo?

Rich.

some pics. Nose is steel ahead of the front bearing ring, inserted into the ali body. So all the load bearing is steel, which is sensible.

[zedman]

Richard's Pistons :-

image.jpg

image.jpg

image.jpg

Thanks for that Mick, pictured is the one converted by Venom to take the HW seal, a std MK 1 and finally one that has been lightened

some pics. Nose is steel ahead of the front bearing ring, inserted into the ali body. So all the load bearing is steel, which is sensible.

some interesting reference photo's there

I'll see if I've time to strip my tx & get a photo of the piston, looks very much like the steel one with the brass adapter T 20 uploaded

Rich.

[zedman]

Thread reserrection time

something I'd noticed in the AGW Venom advert I'd posted earlier in this thread...



the rifle in the photo looks like an early AA S300 but labled as a Gaystate pumper

did Venom play with S300's or was it a graphic-design cockup?

Rich.

[edbear2]

Some pics I took of Lee's guns back a bit for reference;

https://www.flickr.com/photos/312284...57645226549825

And a Prosport possibly tuned;

https://www.flickr.com/photos/312284...57631339732810

ATB, Ed

[Geezer]

Thread reserrection time

something I'd noticed in the AGW Venom advert I'd posted earlier in this thread...



the rifle in the photo looks like an early AA S300 but labled as a Gaystate pumper

did Venom play with S300's or was it a graphic-design cockup?

Rich.

It’s definitely not a Daystate Sportsman as it lacks the huge pump lever.

Enlarging the image, it’s a bit blurry, but you can see where it says “AIR ARMS S300” in white letters on the action.