Hw25 breech latch spring issue

[TonyL]

https://www.airgunnation.com/threads...issue.1288558/

Hi Al, I don't know if this helps at all. Especially post #12?

Yes, the reference to the steel dowel is just for the '30, but guessing what is said about the ball and staking applies the same?

[Dornfelderliebe]

I bought some Meteor parts with a ball catch mechanism. It is also weak. I have not tried this yet but is the spring visible by a slot in the breech block where if you have three hands you could use a screwdriver to compress the spring and put a
shim washer behind the ball for preload.
I don't know about your HW but my Meteor does not look rebuildable.

[Hsing-ee]

https://www.airgunnation.com/threads...issue.1288558/

Hi Al, I don't know if this helps at all. Especially post #12?

Yes, the reference to the steel dowel is just for the '30, but guessing what is said about the ball and staking applies the same?

Thanks for this Tony, the rifle is on its way to its new owner who is aware of the issue .. might be fixable by putting in a wider latch pin for the ball to ride over, the ball spring doesn’t actually FEEL weak, it’s all very strange..

[TonyL]

Gotcha. At least you've made him aware, just like I knew you would. The mark of a gent. Hope the new owner sorts and enjoys.

[Hsing-ee]

Gotcha. At least you've made him aware, just like I knew you would. The mark of a gent. Hope the new owner sorts and enjoys.

The 25 is back in my stable .. I’m going to try measuring the latch pin first with a caliper and see if it’s that because the actual spring pressure seems pretty decent. There may be some way of fixing it yet …

[Hsing-ee]

Gotcha. At least you've made him aware, just like I knew you would. The mark of a gent. Hope the new owner sorts and enjoys.

The 25 is back in my stable after an amicable deal-reverse manoeuvre. I’m going to try measuring the latch pin first with a caliper and see if it’s that because the actual spring pressure seems pretty decent. There may be some way of fixing it yet … Tricky problems are the best and it’s such a funny little rifle, like a HW95 someone put in a very hot wash…

[TonyL]

Back in your stable as in the sale fell through or has the new owner asked you to look into the issue prior to committing?

[Hsing-ee]

Back in your stable as in the sale fell through or has the new owner asked you to look into the issue prior to committing?

The decision to purchase was on my initial assessment of the rifle, the problem became apparent after I stripped degreased and relubed it. It’s an old school 25 all steel, no safety job and it had the original HW grease in it.. The possibly intractable nature of the problem meant it wasn’t as initially described so buyer withdrew.

Means I get to have a play with it now, it’s been sitting in the back of the gun cupboard for years.

[TonyL]

The decision to purchase was on my initial assessment of the rifle, the problem became apparent after I stripped degreased and relubed it. It’s an old school 25 all steel, no safety job and it had the original HW grease in it.. The possibly intractable nature of the problem meant it wasn’t as initially described so buyer withdrew.

Means I get to have a play with it now, it’s been sitting in the back of the gun cupboard for years.

Ah, so the opportunity presents itself to explore this little gun a bit further. Do let us know how it progresses. If it needs to go afterwards, I'm sure it wouldn't be hard to find a home for it.