Green Delrin Bar

[clarky]

Delrin makes excellent piston buttons for smoother cocking of spring rifles.

Yes it does ....provided the drilled hole is super cleaned with alchohol and you use something like loctite 480 ....otherwise the darn things can come adrift.

[lensman57]

Yes it does ....provided the drilled hole is super cleaned with alchohol and you use something like loctite 480 ....otherwise the darn
things can come adrift.

The appropriate adhesieve is a kind of superglue reinforced with rubber particles. This allows for some impact shock protection. The Loctite version is very expensive but I managed to get a small bottle from Techsil, Toughened Cayanoacrylate 80. They are still not cheap but nowhere near Loctite version.
https://www.techsil.co.uk/techsil-to...0HwaAoLq8P8HAQ

A.G

[edbear2]

The appropriate adhesieve is a kind of superglue reinforced with rubber particles. This allows for some impact shock protection. The Loctite version is very expensive but I managed to get a small bottle from Techsil, Toughened Cayanoacrylate 80. They are still not cheap but nowhere near Loctite version.
https://www.techsil.co.uk/techsil-to...0HwaAoLq8P8HAQ

A.G

I use a slot drill to get a flat bottomed hole and use Loctite 2216 A/B...If you think about it the button can go no-where if done like this, and guns I did 6-7 years ago are still working fine as far as I know.

ATB, Ed