Quote Originally Posted by Hsing-ee View Post
One thing with old Sports is the trigger sear spring, the one that goes between the sear and the safety. This can become bent and cause an unreliable trigger. Make sure you replace it when you strip the rifle, and if you are a perfectionist, machine up a tiny teeny little guide for it so it doesn't bend.
I wimped out and took the trigger block out with a couple of cable ties round it so that the safety slide and spring were kept in place. The spring looks straight as far as i can see, but it looks as though a length of suitable diameter rod with the ends tidied up could be dropped into the spring without further dismantling - would that make a useful guide?