Page 1 of 2 12 LastLast
Results 1 to 15 of 26

Thread: OX-Mainspring, too long?

  1. #1
    Join Date
    Apr 2007
    Location
    Selkirk, in the Scottish Borders
    Posts
    347

    OX-Mainspring, too long?

    I got given an OX-Mainspring from a mate, to put in my BSA Lightning. Took the gun apart yesterday but the OX is much longer than the standard spring in the gun, is this normal? I'm Pretty sure it's the right one.


    Cheers


    Hamish
    Falcon FN19 BSA Lightning
    Rapid 7 FAC Lanber 12Bore

  2. #2
    Hsing-ee's Avatar
    Hsing-ee is offline may also be employed in conjunction with a drawn reciprocation dingle arm, to reduce sinusoidal repleneration
    Join Date
    Dec 2001
    Location
    Glasgow
    Posts
    18,217
    'Ox' mainsprings are made in a few types and each type is supposed to fit a number of different guns, so the sizes are an approximation.

    They DON'T have a very good reputation as they can be very harsh and the sharp edges of the square section wire can shave metal inside the gun.

    Also, although this might sound strange, the most powerful spring does not necessarily make the gun more powerful, and can sometimes make it less powerful - and certainly less accurate because of the recoil.

    If you decide to keep the Ox in your BSA do check the power as you may need to clip some coils if it has gone over the limit.

  3. #3
    Join Date
    Apr 2007
    Location
    Selkirk, in the Scottish Borders
    Posts
    347
    My mate had bought it for an HW95 and it says on the Chambers site, that it also fits a Lightning. Might give it back then...
    Falcon FN19 BSA Lightning
    Rapid 7 FAC Lanber 12Bore

  4. #4
    Join Date
    Feb 2006
    Location
    Amlwch, Anglesey
    Posts
    30,416
    Not an expert by any means, but OX springs really are nasty. I'd sooner put a standard factory spring in (can be had for around £8) than an ox.

    As Alistair mentions above, the OX springs come in different sizes (from 1-7 iirc) from different groups of guns. Sounds like the wrong spring to me, though the OX springs always did have a lot of preload (again IIRC as we're talking 15 years back).

  5. #5
    Join Date
    Apr 2002
    Location
    Southwold, where the beer comes from
    Posts
    8,771
    Guess why you were 'given' it

    Use the Ox spring to keep the garden gate shut, its about all theyre good for.

    I used to have one in a HW rifle when I was a kid, made it noisy as hell

    Mark

  6. #6
    Join Date
    Mar 2007
    Location
    Winchester
    Posts
    40
    Quote Originally Posted by Hsing-ee View Post
    They DON'T have a very good reputation as they can be very harsh and the sharp edges of the square section wire can shave metal inside the gun.
    My mate put one in his Webley Eclipse and it totally destroyed the trigger mechanism, not to mention making it extremely loud.

    I guess the old saying applies here: "If it ain't broke don't fix it"

    Pete
    AA S410k .22 - Bushnell Sportsman 3-9x50 IR
    BSA Lightning XL .22 - AGS 3-9X40
    Webley Nemesis .177 - Webley 1.5x15

  7. #7
    Join Date
    Apr 2007
    Location
    Selkirk, in the Scottish Borders
    Posts
    347
    Quote Originally Posted by SHOT BUCK View Post
    I guess the old saying applies here: "If it ain't broke don't fix it"

    Pete

    Its running at 8Ft, lbs.
    Falcon FN19 BSA Lightning
    Rapid 7 FAC Lanber 12Bore

  8. #8
    Join Date
    Mar 2007
    Location
    Winchester
    Posts
    40
    Quote Originally Posted by <Hamish-Mac> View Post
    Its running at 8Ft, lbs.
    ....I retract my statement!
    AA S410k .22 - Bushnell Sportsman 3-9x50 IR
    BSA Lightning XL .22 - AGS 3-9X40
    Webley Nemesis .177 - Webley 1.5x15

  9. #9
    Join Date
    Dec 2007
    Location
    Runcorn right by the bridge
    Posts
    7,567

    Smile bsa springs

    sometimes the springs on lightnings break you might be better with a new bsa spring and a good pollish and lube before trying to cram a big ugly old ox spring in and spoiling it

  10. #10
    Join Date
    Jun 2006
    Location
    Derbyshire, Alfreton
    Posts
    1,503
    Yep standard parts are the best way to go, or splash out on a Vmach kit.

  11. #11
    Join Date
    Jan 2008
    Location
    Edinburgh
    Posts
    368
    i put an ox accelerator in my omega and despite the reputation it has made my gun a hell of a lot smoother to shoot than with the factory spring, more consistent and smoother to cock with a much faster lock time.

    i dont know if anyone who says they;re rubbish have actually tried one recently or if folk are just jumping on the ox hater band wagon...

    ps, it did put the rifle at about 14ft/lbs when i first put it in so be careful with power. trim a coil or two off if you have to.

  12. #12
    Join Date
    Aug 2002
    Location
    Nottingham
    Posts
    26,146
    I had a couple of ox springs fitted recently.

    On my Transit!
    "Improvise, adapt and overcome."

    I can count to potato.

  13. #13
    Join Date
    Aug 2005
    Location
    Leicester
    Posts
    12,379
    chuck the ox spring in the bin,all its worth imho.

    as said before...get a standard lightning spring,a v mach kit or send it to tony at sandwell field sports for a tune up at £45.

  14. #14
    Northernspark Guest
    got an ox in my meteor, it's as smooth as, running at 10.2 flb.

    everybody is keen to jump on the heresay of ox springs been bad.

    S_D_

  15. #15
    Join Date
    Dec 2005
    Location
    Grantham Lincs
    Posts
    2,774
    Maccari does a GOOD square spring made from quality steel, OX springs tend to wreck the gun or fracture on the last three coils.
    Stuff on the box.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •