Results 1 to 12 of 12

Thread: Benjamin trail NP

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    eyebull's Avatar
    eyebull is offline Even a stopped clock is right twice a day
    Join Date
    Feb 2012
    Location
    Borehamwood
    Posts
    6,769
    A 25 FPE gasram pistol...it must be utterly horrid to cock and shoot.
    Good deals with these members

  2. #2
    Join Date
    Mar 2009
    Location
    Wigan
    Posts
    4,956
    Quote Originally Posted by eyebull View Post
    A 25 FPE gasram pistol...it must be utterly horrid to cock and shoot.
    Its a rifle Never the less it isn't a good rifle. Not really worth spending money on.
    You can spend thousands and still miss a barn door or spend just enough and enjoy yourself. If you haven't got the talent to start with a million pound won't fix it. Whippet, Russell, a few bang sticks and a flat cap. http://www.smart-tech1st.co.uk

  3. #3
    eyebull's Avatar
    eyebull is offline Even a stopped clock is right twice a day
    Join Date
    Feb 2012
    Location
    Borehamwood
    Posts
    6,769
    Quote Originally Posted by Rob Edge View Post
    Its a rifle Never the less it isn't a good rifle. Not really worth spending money on.
    Beg pardon, thought it was the pistol of the same name.
    Good deals with these members

  4. #4
    Join Date
    Mar 2007
    Location
    Near Ipswich, Suffolk
    Posts
    1,483
    Contact ASI (the importers) they should be able to give you an idea of cost

  5. #5
    Join Date
    Aug 2013
    Location
    Stowmarket
    Posts
    425
    These are are BAM19's (SMK XS19). You will need a top hat, spring guide and stepped block that fits between guide and rear metal end block. If you like the look of the thumbhole stock and shrouded barrel on the Benjy, it would probably be cheaper to pick up a tatty XS19 and swap the action. The barrel diameter on the Benjy is slightly smaller than the XS19, so the shroud won't fit over it

  6. #6
    Join Date
    Mar 2010
    Location
    mountain ash
    Posts
    8,668
    Thanks for all the advice above, Yes it is a rifle, The one described below with shroud and thumb hole stock,

  7. #7
    Join Date
    Mar 2010
    Location
    mountain ash
    Posts
    8,668
    Quote Originally Posted by gunsnlandies View Post
    These are are BAM19's (SMK XS19). You will need a top hat, spring guide and stepped block that fits between guide and rear metal end block. If you like the look of the thumbhole stock and shrouded barrel on the Benjy, it would probably be cheaper to pick up a tatty XS19 and swap the action. The barrel diameter on the Benjy is slightly smaller than the XS19, so the shroud won't fit over it
    Thanks for the info bud

  8. #8
    Join Date
    Aug 2015
    Location
    manchester
    Posts
    7,674
    Quote Originally Posted by eyebull View Post
    A 25 FPE gasram pistol...it must be utterly horrid to cock and shoot.
    They are apparently.

    A.G

  9. #9
    Join Date
    May 2012
    Location
    wilmslow
    Posts
    307
    If the guts of these are Chinese built you may find poorly fitted piston seals compromising power.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •