Uberti Remington 1858 parts?

[panhard]

as tac said.....
i only shoot mine between 6 and 18 shots per session with 25gns swiss bp /wad /.457 ball and have no issues....only thing that can happen is a spent primer cap can drop into a crevice and stop cylinder rotation lol.
i always grease my cylinder pin with imperial wax or sometimes wonderlube if i grease over balls( oooooh errrrr ) and have it left on my fingers.
what bp do you use?

I use 777. I clean cylinder pin every reload as it still just about slides after 5/6 shots. I've got some wonder lube so try that next time. Not had a problem so far with caps falling through slot, had that on a friends old army ruger which seemed quite prone to that problem. Posted spare spring back to you today. The one you supplied looks much better than original quality. Thanks again.

[loiner1965]

I use 777. I clean cylinder pin every reload as it still just about slides after 5/6 shots. I've got some wonder lube so try that next time. Not had a problem so far with caps falling through slot, had that on a friends old army ruger which seemed quite prone to that problem. Posted spare spring back to you today. The one you supplied looks much better than original quality. Thanks again.

i use to use 777 but unless you have a remote loading stand you can compress it too much which as far as i know doesnt like it,
does the cylinder pin move freely prior to shooting ?
what lube do you use as it might be a combination of the 2 that causing you problem.

[lostcat]

Few drops of olive oil on the arbor will keep the pin free for a session,keeps the fouling soft,just add a few more drops if things start to get sticky.
Sems thr plated pin on the SS version are more prone to jamming,a hammer is not the first or best option though.